Equipment for determining the center-of-mass position and inertia characteristics of nanosatellites
Glavkosmos
Ground-based measurement equipment for determining the center-of-mass position and axial moments of inertia of nanosatellites up to 10 kg.
Key figurescomparable across the catalogue
- Mass
- 1 kg
- Largest dimension
- 1,300 mm
- Design life
- 3 years
- Lead time
- 12 months
Normalised to common units so this product can be compared with others in its category. The supplier's own wording is below.
As published by the supplier
- Inaccuracy of the center-of-mass position determining
- not more then 1 mm
- Accuracy of axial moments of inertia determination
- not less then 1.5%
- Year of release
- 2017
- Design life
- 3 years
- Lead time
- 12 months
- Flight qualification of the product
- No
- Possibility to adapt the product to customer requirements
- Yes
- Size of equipment
- 500 × 450 × 1300 mm
- Maximum dimensions of the objects
- 350 × 150 × 150 mm
- Supply voltage
- 220 V (voltage at the equipment is 5 V)
- Range of the mass of the objects
- 1… 10 kg
- Counting of measurements
- electronic (display and memory card)
- Range of operating temperature
- 0 … 35°C
- Set of fixing devices of nanosatellite at the equipment
- not included
About
This equipment is designed for the determination of the center-of-mass position and inertia characteristics of nanosatellites during assembly, integration and testing. It measures test objects with a maximum size of 350 x 150 x 150 mm and mass in the range of 1 to 10 kg, providing center-of-mass position determination with an inaccuracy of not more than 1 mm and axial moments of inertia determination accuracy of not less than 1.5%. The equipment itself measures 500 x 450 x 1300 mm and operates on a 220 V supply, with 5 V used at the equipment. Measurement results are recorded electronically via a display and memory card. It operates within a temperature range of 0 to 35°C. A set of fixing devices for mounting the nanosatellite to the equipment is not included and must be provided separately. The product can be adapted to customer requirements. It was released in 2017, has a guaranteed service life of 3 years, and an estimated production/delivery time of 12 months. The product is not flight-qualified, as it is ground support equipment rather than a flight article.
Documentation
No public datasheet yet — request the datasheet / ICD from the supplier.