HIRCOM CubeSat UHF Transceiver
Radiation-resistant, CubeSat-compliant half-duplex UHF transceiver for space-to-ground TMTC links.
Typed specifications18 values
Discloses 6 of 13 fields engineers filter by in this category (category median 3).
- Frequency band
- UHF datasheet p.2
- Mass
- 85 g datasheet p.2
- Frequency range
- 400–438 MHz datasheet p.2
- Envelope (L×W×H)
- 95mmX90mmX15mm datasheet p.1
- TX RF output power
- 1.59 W Maximum Output Power · datasheet p.2
- Data rate
- 1.2–9.6 kbps baud rate · datasheet p.2
- RX sensitivity
- -30 dBm Maximum RX Input Power · datasheet p.2
- Modulation
- GMSK datasheet p.2 AFSK
- Supply voltage
- 5 V Power amplifier · datasheet p.2 3.3 V Transceiver and controller
- Power consumption
- 0.11 W Low Power Mode · datasheet p.2 0.63 W Receiving Mode | 4.8 W Transmitting Mode
- Data interface
- CAN datasheet p.2 other RF | SPI
- Operating temperature
- -35–80 °C datasheet p.2
Each value is typed with its unit and measurement condition and cites the datasheet page it was taken from. Nothing is guessed: a field that is absent here has not been published by the manufacturer. machine-extracted ✓ checked by NewSpace Market ✓ manufacturer confirmed by the manufacturer.
As published by the supplier11 lines, in the manufacturer's own wording
- Mass
- 85 g
- Width
- 95 mm
- Length
- 90 mm
- Height
- 15 mm
- Supply voltage
- 3.3 V (transceiver and controller), 5 V (power amplifier)
- Current consumption
- 630 mW receiving mode, 4.8 W transmitting, 110 mW low power mode (@25°C)
- Frequency
- 400 to 438 MHz
- RF power
- 32 dBm
- Frequency stability
- 0.5 ppm
- Modulation
- GMSK, AFSK
- Interface
- CubeSat Kit PC/104, connector M80-5401442
About
The TRAD HIRCOM CubeSat UHF transceiver is a high-reliability, cost-effective half-duplex sub-system providing telemetry and telecommand (TMTC) communication links between space and ground segments over the UHF band. It is compliant with the CubeSat standard, built on a CubeSat Kit PC/104 form factor with the M80-5401442 connector, and uses GMSK/AFSK modulation with software-controlled operation. The card is designed for high reliability and radiation resilience, leveraging TRAD’s radiation-testing and analysis expertise (established 1994) and its co-located CSUM space-center facilities (gamma-source irradiation lab). Connectors are customizable on demand. HIRCOM was TRAD’s first product in its long-term push into the New Space market as a manufacturer of high-reliability components for CubeSats and small satellites.
Documentation
Need the full ICD, test reports or a specific revision? Ask the supplier directly.