NanoCom SDR MK3
GomSpace
The NanoCom SDR MK3 is a Software Defined Radio platform known for its unique modularity and compact design, supporting custom RF applications.
Typed specifications74 values
Discloses 6 of 13 fields engineers filter by in this category (category median 5).
- Mass
- 272 g total with 1xTR600 (typical) · datasheet p.12 306 g total with 2xTR600 (typical) | 342 g total with 3xTR600 (typical) | 272 g with 1xTR600 (typical) | 306 g with 2xTR600 (typical) +4
- Frequency range
- 70 MHz min · TR600 (AD9361), 70 MHz to 6 GHz · datasheet p.6 6 000 MHz max · TR600 (AD9361), 70 MHz to 6 GHz | 70–6 000 MHz TR600
- Envelope (L×W×H)
- 95 x 95 x 23,85 mm with 1xTR600 · datasheet p.12 95 x 95 x 23,85 with 1xTR600 (L x W x H) | 95 x 95 x 31,65 mm with 2xTR600 | 95 x 95 x 31,65 with 2xTR600 (L x W x H) | 95 x 95 x 31,65 mm with 3xTR600 +1
- Supply voltage
- 12 V min · datasheet p.16 32 V max | -0.3–36 V Supply Voltage (Main/Backup) | 12–32 V Supply voltage (Main/Backup)
- Power consumption
- 5.46 W Supply (Main/Backup), enable one TR600 on Slot A, Vin = 12V, … · datasheet p.16 5.58 W Supply (Main/Backup), enable one TR600 on Slot A, Vin = 18V, … | 5.69 W Supply (Main/Backup), enable one TR600 on Slot A, Vin = 24V, … | 5.89 W Supply (Main/Backup), enable one TR600 on Slot A, Vin = 32V, … | 8.76 W Supply (Main/Backup), enable three TR600 on Slot A, Slot B an… +11
- Data interface
- CAN datasheet p.19 JTAG debug | USB host/device | RS-422 payload data interface | GPIO PL/PS single ended IO +7
- Operating temperature
- -40–50 °C qualified with three TR600, thermal interface · datasheet p.11 -40–50 °C Thermal interface temperature | -40–50 °C with three TR600 modules
- Radiation tolerance (TID)
- 20 krad product page
- Function
- SDR platform (user waveforms) modular SDR platform built to support custom RF applications · datasheet p.6
- Link use
- inter-satellite link intersatellite link / crosslink, NTN data relay · datasheet p.6 IoT / M2M uplink narrowband IoT and tracking solutions | signal reception (AIS / ADS-B / spectrum) SIGINT/Spectrum Monitoring
- Instantaneous bandwidth
- 200 kHz min · channel BW tuneable, per TR600 · datasheet p.6 56 000 kHz max · channel BW tuneable, per TR600
- TX chains
- 2 per TR600 (up to three TR600) · datasheet p.6
- RF connector
- SMPM TX1, RX1, TX2, RX2 on each TR600 · datasheet p.6
- RX chains
- 2 per TR600 (up to three TR600) · datasheet p.6
- Waveform development
- vendor SDK platform development kit (PDK) with reference designs · datasheet p.6
- Connector
- Harwin Gecko G125 1.25mm pitch (power, COM, SpaceWire) datasheet p.18
- Survival temperature
- -40–85 °C non-operational · datasheet p.11 -40–85 °C Storage Temperature
- Flight heritage
- flight proven; Flight heritage datasheet p.6
- TX/RX chains (as printed)
- up to three TR600, each 2xRX and 2xTX channels; MCS 4 to 6 synchronous RX paths datasheet p.6
- Max RX input level
- 5 dBm max · RF inputs (Peak Power), absolute maximum · datasheet p.8
- FPGA / SoC
- Xilinx Zynq 7030/7045 Programmable SoC, FPGA 125k/350k logic cells datasheet p.6
- Duplex
- full support TDD and FDD operation · datasheet p.6
- Processor
- Dual ARM Cortex A9 MPCore, up to 800MHz datasheet p.6
- RF transceiver chip
- AD9361 (TR600) datasheet p.6
Each value is typed with its unit and measurement condition and cites the datasheet page it was taken from. Nothing is guessed: a field that is absent here has not been published by the manufacturer. machine-extracted ✓ checked by NewSpace Market ✓ manufacturer confirmed by the manufacturer.
As published by the supplier11 lines, in the manufacturer's own wording
- SoC
- Xilinx Zynq 7030/7045 Programmable SoC
- Volatile Memory
- 1024 MB DDR3 (512 MB with ECC enabled)
- Non-volatile memory
- 70 GB eMMC (pSLC) and 233 GB eMMC (MLC)
- Mechanical dimensions
- 95 mm x 95 mm x 31.5 mm (with 3 x TR600)
- Mass
- 240 g
- Radiation
- 20 kRad TID
- SpaceWire
- x3
- USB
- x1
- Frequency Band
- 70 MHz to 6 GHz
- Tunable Channel bandwidth
- 200 KHz to 56 MHz
- Resolution
- 12-bit DACs and ADCS
About
The NanoCom SDR MK3 is a Software Defined Radio (SDR) platform that stands out for its unique modularity and compact design, supporting custom RF applications. Featuring a powerful Zynq®7030/45 System on a Chip (SoC) at its core, its small form factor can incorporate up to three NanoCom TR600 MK3 Transceivers, each offering 2xRX and 2xTX Channels, making it a truly flexible, versatile, and cost-effective solution. Equipped with hardware prepared for Store and Forward, NanoCom SDR MK3 serves as an ideal choice for custom intersatellite link/crosslink solutions in constellations or Non-Terrestrial Network (NTN) data relay applications. The flexibility of NanoCom SDR MK3 opens up a broad spectrum of mission applications, including high data rate intensive applications such as SIGINT/Spectrum Monitoring, custom broadband and multiband communications, and Narrowband IoT and tracking solutions. It offers a wealth of configurable I/O options, complemented by GomSpace’s extensive portfolio of antenna solutions, ensuring quick, efficient, and flexible integration. For those seeking to develop custom SDR applications, Gomspace provides a comprehensive development kit as well as an optional, in-depth, SDR standard training course.
Documentation
- Data-Sheet-NanoCom-SDR-MK3-1.pdf PDF source: gomspace.com ↗
- Option-Sheet-NanoCom-SDR-MK3-1.pdf PDF source: gomspace.com ↗
- Flyer-NanoCom-SDR-MK3-1.pdf PDF source: gomspace.com ↗
Need the full ICD, test reports or a specific revision? Ask the supplier directly.