Space Hardware Marketplace

I/O LED Module

• SKU710-00521
• Price$360.00
• ClassificationDevelopment Hardware

A CubeSat Kit development module that visually displays the status of all 48 bus I/O lines on LEDs…

Breakout Board Module

• SKU711-00380
• Price$255.00
• ClassificationDevelopment Hardware

A CubeSat Kit development module that breaks out all bus I/O, USER and MHX signals to headers compatible…

Linear EPS Module (LEPSM1)

A low-cost development-only Electrical Power System module with 10-20Wh of battery energy that supplies +7.4Vdc, +5Vdc and +3.3Vdc…

Protoboard Module Kit

• SKU711-00303
• Price$100.00 per item
• CategoryPrototyping Hardware

A prototyping PCB module for the CubeSat Kit that lets engineers wire through-hole components into circuitry connected to…

Motherboard Module (MBM)

• Price$1,575.00
• Hardware classificationFlight Hardware | Flight Qualified | Space Proven
• Module height0.600 in (15.24 mm)

Pumpkin's flagship flight on-board computer carrier module: combined with a Pluggable Processor Module it forms a low-power 8-…

Development Board (DB)

• SKU710-00297
• Price$1,710.00
• Bus interfaceCubeSat Kit Bus standard, 104-pin connector

Pumpkin CubeSat Kit module that hosts a Pluggable Processor Module (PPM) to form a low-power 8- or 16-bit…

CubeSat Kit™ Base Plate Assembly for AntS Antenna

• Configuration option: separation switchDual
• MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)
• Mounting fasteners (to Chassis Walls)6x M3 flathead stainless-steel screws

A base-plate assembly variant configured to mount a third-party AntS deployable antenna system, with dual independent separation switches,…

CubeSat Kit™ Cover Plate Assembly for AntS antenna

• Configuration option: separation switchNone, Dual
• Antenna compatibilityThird-party AntS deployable antenna system
• Antenna mounting fasteners4x threaded fasteners

A cover-plate assembly variant configured to mount a third-party AntS deployable antenna system, with dual independent separation switches,…

CubeSat Kit™ Pro Chassis Walls

• Configuration option: size0.5U, 1U, 1.5U, 2U, 3U
• Product tierPro (premium variant of CubeSat Kit Chassis Walls)
• Price range (USD)$22,500.00 - $39,500.00

The premium, higher-specification tier of Pumpkin's flight-proven one-piece sheet-metal CubeSat structural element, offered in 0.5U-3U sizes as Flight…

CubeSat Kit™ Large Aperture Cover Plate Assembly

• Configuration option: separation switchNone, Dual
• MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)
• Mounting fasteners4x M3 flathead stainless-steel screws

A CDS-compliant cover-plate assembly with an 88mm-diameter central cutout for payload-end apertures such as optics or antennas, with…

CubeSat Kit™ Payload Cover Plate Assembly

• MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)
• Payload mountingM3 bolt square pattern
• Corner feet4 (included)

A CDS-compliant cover-plate assembly with four corner feet used on the payload end of a CubeSat Kit structure…

CubeSat Kit™ Payload Adapter Plate

• MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)
• Mounting fasteners (to Chassis Walls)4x M3 flathead stainless-steel screws
• Payload mountingM3 bolt square pattern

A bulkhead plate used on the payload end of a CubeSat Kit structure to interface Pumpkin's sheet-metal Chassis…

Mid-plane Standoff Kit

• Kit contents4 unique precision hard-anodized aluminum pieces + fastening hardware
• FunctionCouples threaded-rod columns of module stack to Chassis Walls; restrains X/Y motion under vibration
• Compatible chassis walls sizes1U, 1.5U, 2U, 3U (pre-drilled mounting holes); usable in 1U when space permits

A hard-anodized aluminum standoff kit that couples the four threaded-rod columns of a CubeSat electronics module stack to…

Remove-Before-Flight (RBF) Bracket Kit

• MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)
• Compatible chassis walls sizes1.5U, 2U, 3U
• Mounting fasteners2x external M3 screws to Chassis Walls

A precision aluminum bracket used in 1.5U/2U/3U CubeSat Kit structures to support and guide the Remove-Before-Flight pin, power…

Rod & Spacer Kit

• Mass4 g
• Height5.0 mm
• Mounting holeM3

A kit containing threaded rods and coaxial aluminum through-hole spacers designed to physically retain CubeSat Kit™ modules in…

CubeSat Kit™ Base Plate Assembly

• Configuration option: typeSolid-Wall, Skeletonized
• Configuration option: separation switchSingle (deprecated), Dual
• MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)

A precision aluminum end-plate assembly that forms the Motherboard Module (MBM)/C&DH end of a CubeSat Kit structure, available…

CubeSat Kit™ Chassis Walls

• Configuration option: size0.5U, 1U, 1.5U, 2U, 3U
• Configuration option: typeSolid-Wall, Skeletonized
• MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)

Pumpkin's pioneering one-piece sheet-metal CubeSat structural element, available in 0.5U-3U sizes, that forms the primary chassis of a…

CubeSat Kit™ Cover Plate Assembly

• Configuration option: typeSolid-Wall, Skeletonized
• MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)
• Mounting fasteners4x M3 flathead stainless-steel screws

A precision aluminum end-plate assembly that forms the payload end of a CubeSat Kit structure, secured to the…