GaN C SSPA/BUC 800W Indoor
TTI Norte
An 800W GaN C-band Solid State Power Amplifier/Block Upconverter (SSPA/BUC) designed for indoor use, offering high power output and various control modes.
Key figurescomparable across the catalogue
- Mass
- 35 kg
- Power
- 3,000 W
- Largest dimension
- 518 mm
Normalised to common units so this product can be compared with others in its category. The supplier's own wording is below.
As published by the supplier
- Input frequency range (BUC)
- 950-1525 MHz
- Operating frequency range
- 5.85 - 6.425 GHz
- LO
- 4.9 GHz
- Output power (PSAT (typical))
- 59 dBm
- Linear output power (PLINEAR*)
- 58 dBm
- Gain
- >70 dB
- Gain flatness
- 3 dB p-p max over full band; 1 dB p-p max over any 40 MHz
- Gain variation over temperature
- ± 1.5 dB over full operating range
- Attenuation adjustment range
- 20 dB 0.1 dB step
- Input VSWR
- ≤1.5:1
- Output VSWR
- ≤1.3:1
- Phase noise (BUC) @ 100Hz
- -75 dBc/Hz
- Phase noise (BUC) @ 1 kHz
- -90 dBc/Hz
- Phase noise (BUC) @ 10Hz
- -100 dBc/Hz
- Phase noise (BUC) @ 100 kHz
- -100 dBc/Hz
- External ref. freq. & phase noise (BUC)
- 10 MHz, 0 dBm ±5 dB (TX IF port multiplexed), -135 dBc/Hz at 100 Hz, -155 dBc/Hz at 1 kHz, -160 dBc/Hz at 10 kHz
- Spectral regrowth
- -25 dBc @ PLINEAR*
- Spurious
- -60 dBc max @ PLINEAR*
- Input voltage
- 90-264 VAC, 50-60 Hz
- Power consumption @ PSAT
- <3000 W
- Dimensions (W x H x D)
- 483 x 266 x 518 mm - RF unit 6RU panel height
- Power Supply
- 1RU panel height
- Weight
- 35 Kg
- Operating temperature
- 0 ºC to +50 ºC
- Storage temperature
- -40 ºC to +85 ºC
About
The GaN C SSPA/BUC 800W is an indoor unit providing high power amplification and upconversion in the C-band. It features an operating frequency range of 5.85 – 6.425 GHz and an output power of 59 dBm (typical PSAT). The unit includes automatic control modes like AGC and ALC, and offers remote monitoring and control via RS-485/USB, with options for Ethernet and SNMP. It is designed for robust performance with internal self-protection mechanisms against high temperature, reflected power, and high input-output power. The system is housed in a 6RU panel height RF unit and a 1RU panel height power supply, with a total weight of 35 Kg. It supports various interfaces including N-type (f) for RF input, CPR-137-G Grooved for RF output, and DB15 (m) / DB9 (f) for M&C.
Documentation
No public datasheet yet — request the datasheet / ICD from the supplier.