GaN Ku SSPA/BUC 600W Outdoor
TTI Norte
An outdoor Gallium Nitride (GaN) Ku-band Solid State Power Amplifier/Block Upconverter (SSPA/BUC) with 600W output power, ideal for SATCOM broadcast applications.
Key figurescomparable across the catalogue
- Mass
- 68.5 kg
- Power
- 2,600 W
- Largest dimension
- 550 mm
Normalised to common units so this product can be compared with others in its category. The supplier's own wording is below.
As published by the supplier
- Output power (PSAT (typical))
- 600 W (57.8 dBm)
- Linear output power (PLINEAR*)
- 600 W (56.8 dBm)
- Input voltage
- 90-264 VAC, 50-60 Hz
- Power consumption @ PSAT
- 2600 W
- Dimensions (L x W x H)
- 550 x 360 x 289 mm
- Weight
- 68.5 Kg
- Operating temperature
- -30 ºC to +55 ºC
- Storage temperature
- -40 ºC to +85 ºC
- Humidity
- 100 % condensing
- Input frequency range (BUC (1))
- 950-1700 MHz
- Input frequency range (BUC (2))
- 950-1450 MHz
- Operating frequency range (1)
- 13.75-14.50 GHz, LO 12.80 GHz
- Operating frequency range (2)
- 12.75-13.25 GHz, LO 11.80 GHz
- Gain (SSPA)
- >65 dB
- Gain (BUC)
- >70 dB
- Gain flatness
- 3 dB p-p max over full band; 1 dB p-p max over any 40 MHz
- Gain variation over temperature
- ±1.5 dB over full operating range
- Attenuation adjustment range (BUC)
- 25 dB in 0.25 dB step
- Attenuation adjustment range (SSPA)
- 25 dB in 0.10 dB step
- Input VSWR
- ≤1.5:1
- Output VSWR
- ≤1.3:1
- Phase noise (BUC)
- -65 dBc/Hz at 100Hz, -85 dBc/Hz at 1 kHz, -90 dBc/Hz at 10Hz, -95 dBc/Hz at 100 kHz
- External ref. freq. & phase noise (BUC)
- 10 MHz, 0 dBm ±5 dB (TX IF port multiplexed) -135 dBc/Hz at 100 Hz, -155 dBc/Hz at 1 kHz, -160 dBc/Hz at 10 kHz
- Spectral regrowth
- -25 dBc @ PLINEAR*
- Spurious
- -60 dBc max @ PLINEAR*
About
The GaN Ku SSPA/BUC 600W is an outdoor unit providing 600W of output power for Ku-band SATCOM broadcast applications. It features a robust design with options for extended temperature range (-40 ºC to +55 ºC) and redundant systems (1:1, 2:1, N:1). The unit supports automatic control modes (AGC, ALC) and offers various interfaces including RF Input (N(f) for BUC / SMA(f) for SSPA), RF Output (WR75 grooved), AC Line (3-pin MIL circular), and M&C (19-pin MIL circular). Monitoring and control are available via RS-485/USB, allowing for monitoring of forward & reverse output power, input power, temperature, and summary alarms. It also includes internal self-protection mechanisms for temperature and reflected power. The power supply operates on 90-264 VAC, 50-60 Hz.
Documentation
No public datasheet yet — request the datasheet / ICD from the supplier.