GAUSS RADIO UHF – 2W/5W
GAUSS Srl
A software-reconfigurable UHF radio transceiver for CubeSats and small satellites, available in 2 W and 5 W output power versions.
Typed specifications23 values
Discloses 5 of 13 fields engineers filter by in this category (category median 3).
- Frequency band
- UHF datasheet p.1
- TX RF output power
- 5 W datasheet p.1
- Data rate
- 300 kbps min · datasheet p.1 100 000 kbps max
- RX sensitivity
- -122 dBm 300bps · datasheet p.1 -109 dBm 50kbps | -119 dBm 9.6kbps
- Modulation
- 2FSK datasheet p.1 MSK | GFSK | GMSK
- Supply voltage
- 3.3 V logic · datasheet p.1 7 V power amplifier | 12 V power amplifier
- Data interface
- I2C datasheet p.1 USB Mini Ground Dongle | UART | SPI | CAN
- Operating temperature
- -40 °C min · datasheet p.2 110 °C max
- Connector
- SMA datasheet p.2 MCX
Each value is typed with its unit and measurement condition and cites the datasheet page it was taken from. Nothing is guessed: a field that is absent here has not been published by the manufacturer. machine-extracted ✓ checked by NewSpace Market ✓ manufacturer confirmed by the manufacturer.
As published by the supplier9 lines, in the manufacturer's own wording
- Configurations
- 2 W (low-power) and 5 W (high-power) versions
- Uplink/downlink
- Totally independent; each configurable with different frequencies, modulations and protocols
- Reconfigurability
- Reconfigurable via software, including dynamic output power changes
- Form factor
- Stackable on the same PCB/104 board (two radios in parallel or redundant configuration)
- Included accessories
- Adapter board for testing and a computer software interface
- Compatibility
- Fully compatible with the GAUSS Mini Ground Dongle
- Supply voltage
- 3.3 V for the logic and 7 to 12 V for the amplifier
- Data rate
- 300 bps to 100 kbps
- Operating temperature
- -40…+110°C
About
The GAUSS UHF Radio is a satellite communications transceiver available in two configurations: a low-power 2 W version and a high-power 5 W version. The uplink and downlink channels are totally independent, meaning each can be configured with different frequencies, modulations and protocols. The radio can be reconfigured via software, including dynamic changes to the output power during operation. Thanks to its compact dimensions, two radio units can be stacked on the same PCB/104 board, allowing them to be used in parallel or for redundancy purposes. Each radio is supplied together with an adapter board for testing and a computer software interface, enabling ground testing and integration support. The product is fully compatible with the GAUSS Mini Ground Dongle for TT&C ground station simulation and testing.
Documentation
- Flyer_Gauss_Radio_UHF_5W-8.pdf PDF source: eb61decf82.clvaw-cdnwnd.com ↗
- Flyer Radio 2W.pdf PDF source: eb61decf82.clvaw-cdnwnd.com ↗
Need the full ICD, test reports or a specific revision? Ask the supplier directly.