NanoCom SR2000
The NanoCom SR2000 is a flexible high-speed S-band radio transceiver built on GomSpace's SDR platform, designed for satellite to ground communication.
Typed specifications70 values
Discloses 5 of 13 fields engineers filter by in this category (category median 5).
- Mass
- 28.7 g PCB · datasheet p.8
- Link protocols and waveforms
- Partial CCSDS Proximity-1 Compliance, Category A datasheet p.8 CCSDS Proximity-1 partial compliance, Category A | CSP payload data via TCP/IP over PPP or CSP | IP (Ethernet over RF) via PPP | SFCG recommendation 21-4R4 spectral mask compliance
- Frequency range
- S-band operation (1980-2290 MHz) datasheet p.8 1 980 MHz min | 2 290 MHz max | 1 980–2 290 MHz S-band operation | S-band operation 1980-2290 MHz +11
- Envelope (L×W×H)
- 65 x 40 x 6.5 mm datasheet p.8
- Data rate
- 1 250 kbps max · Layer-3 bandwidth, FDD · datasheet p.8 500 kbps max · Layer-3 bandwidth, TDD | 1 250 kbps max · Layer-3 UDP throughput (max), FDD | 500 kbps max · Layer-3 UDP throughput (max), TDD | 1 250 kbps max · Layer-3, FDD +5
- RX sensitivity
- High sensitivity PER less than 1e-4 at Eb/No = 5 dB · datasheet p.8
- Modulation
- Filtered QPSK modulation datasheet p.8 QPSK filtered QPSK, symbol rate 500 kBd to 2 MBd | High-speed QPSK transceiver S-band communication | QPSK | QPSK +1
- Supply voltage
- 3–3.6 V VCC · datasheet p.8
- Power consumption
- 2.3 W max · max · datasheet p.8
- Data interface
- CAN datasheet p.9 CAN for configuration and CSP datagram transfer | RS-422 for payload data transfer | RS-422 for payload data transfer (either TCP/IP via PPP or CSP) | UART GOSH console interface +10
- Operating temperature
- -40 °C product page
- Function
- modem high speed S-band radio transceiver, closed firmware on NanoC… · datasheet p.3
- Link use
- payload data downlink HSL - High Speed Link for satellite to ground communication · datasheet p.4 inter-satellite link ISL / ASL solutions
- Frequency band
- S datasheet p.8 S | S | S
- Waveform development
- closed (fixed waveforms only) radio firmware closed source, not modifiable · datasheet p.8
- TX/RX chains (as printed)
- Dual-modem support allows two simultaneous RF links datasheet p.8
- Channel coding (FEC)
- concatenated RS + convolutional convolutional code plus Reed-Solomon · datasheet p.8
- Duplex
- full frequency and time division duplex support (FDD) · datasheet p.8 half TDD
Each value is typed with its unit and measurement condition and cites the datasheet page it was taken from. Nothing is guessed: a field that is absent here has not been published by the manufacturer. machine-extracted ✓ checked by NewSpace Market ✓ manufacturer confirmed by the manufacturer.
As published by the supplier8 lines, in the manufacturer's own wording
- Layer-3 bandwidth
- up to 6 Mbps (FDD)
- Symbol rate
- 500 kBd to 7 MBd
- S-band operation
- 1980-2290 MHz
- Form factor
- PC104
- Interfaces
- CAN, LVDS, I2C, SSMCX antenna connectors
- Operational temperature
- -40°C to +85°C
- Interface
- RS422, CAN, UART/GOSH console
- Sensitivity
- PER less than 1e-4 at Eb/No = 5 dB
About
The SR2000 is implemented as a ready-to-use S-band radio with a radio firmware, suitable for High Speed Link (HSL) solutions for satellite to ground communication. For a full solution, it can be used with the S-band patch antenna ANT2000 for ground link. Key features include an S-band radio firmware based on GomSpace Software Defined Radio, compatibility with GomSpace S-band patch antennae modules, and flexible layer-3 bandwidth up to 6 Mbps (FDD). It is fully configurable in-orbit and compliant with GomSpace CSP. The system consists of NanoDock SDR, NanoCom TR600, NanoMind Z7000, and S-band radio firmware. The radio system supports high-speed QPSK transceiver for point-to-point S-band communications, frequency and time division duplex, symbol rates from 500 kBd to 7 MBd, and S-band operation (1980-2290 MHz). It also features dual-modem support for two simultaneous RF links, adjustable output power, PC104 form factor, and interfaces including CAN, LVDS, I2C, and SSMCX antenna connectors. The operational temperature range is -40°C to +85°C. The included S-band radio software allows communication even under poor link conditions using error correction algorithms (FEC and Reed-Solomon).
Documentation
- gs-salesdoc-sr2000solutions-11.pdf PDF source: gomspace.com ↗
- gs-ds-nanocom-sr2000-230.pdf PDF source: gomspace.com ↗
- gs-ds-nanomind-z7000-15-1.pdf PDF source: gomspace.com ↗
Need the full ICD, test reports or a specific revision? Ask the supplier directly.