NanoMind HP MK3
GomSpace
The NanoMind HP MK3 is a powerful On-board computer designed for high-performance, efficient on-board processing and hardware acceleration functions to meet the demands of complex payloads.
Typed specifications61 values
Discloses 10 of 13 fields engineers filter by in this category (category median 5).
- Processor
- Xilinx Zynq 7030/7045 Programmable SoC (Dual ARM Cortex A9 MPCore) datasheet p.5
- Mass
- 240 g mass total (typical) · datasheet p.9 240 g typical | 240 g typ.
- CPU clock
- 800 MHz max · datasheet p.5 800 MHz max · up to 800MHz
- Envelope (L×W×H)
- 95 x 95 x 24,15 mm datasheet p.9
- RAM
- 1 024 MB datasheet p.5 1 024 MB DDR3 RAM | 512 MB with Error Correction Code enabled
- Mass storage
- 233 GB eMMC (MLC) · datasheet p.5 70 GB eMMC (pSLC) | 0.25 GB NOR flash
- Supply voltage
- 36 V max · absolute maximum rating, supply voltage (Main/Backup) Vin · datasheet p.6 12–32 V | 12–32 V Vin supply voltage (Main/Backup), J19, J20
- Power consumption
- 1.8 W Idle, Vin = 12V, 25°C · datasheet p.12 1.85 W Idle, Vin = 18V, 25°C | 1.92 W Idle, Vin = 24V, 25°C | 2.08 W Idle, Vin = 32V, 25°C | 1.8 W Idle, Vin=12V, 25C +3
- Data interface
- SpaceWire datasheet p.5 LVDS 11 LVDS pairs on PL IO-4 (J10); PPS and CLK LVDS inputs | CAN CAN1 and CAN2 on COMM 1-2 (J5, J6); PL CAN 1-3 (J15, J16, J17) | JTAG debug and programming interface DEBUG (J1), JTAG-HS3 debug ha… | I2C I2C-SDA / I2C-SCL on COMM 1-2 (J5, J6) +13
- Operating temperature
- -40–50 °C datasheet p.8 -40–50 °C qualified operational temperature range (thermal interface)
- Radiation tolerance (TID)
- 20 krad product page
- Processor architecture
- ARM Cortex-A Dual ARM Cortex A9 MPCore · datasheet p.5
- Board format
- 95 L x W x H · datasheet p.9
- Flight software support
- Linux BSP from Xilinx with Yocto Project components; development kits PDK and SDK for software application and FPGA development datasheet p.5
- Radiation and fault mitigation
- EDAC / ECC on RAM 512MB of the 1GB DDR3 with Error Correction Code enabled · datasheet p.5 other HW Bit-Flip Detection on eMMC | other Redundant Firmware Image
- Connector
- Harwin Gecko G125-MH10605L1R (PWR-1/PWR-2), G125-MH12005L1R (COMM 1-2), G125-MH11005L1R (SpaceWire), G125-MH12605L1P (PL DIFF IO-4); Molex Picoblade 532611371 / 532610971 / 532611071 / 532610571 (PL SE IO, RS485, RS422) datasheet p.14
- Survival temperature
- -40–85 °C datasheet p.8 -40–85 °C non-operational / storage temperature range
- Cores
- 2 Dual ARM Cortex A9 MPCore · datasheet p.5
- FPGA
- Powerful FPGA with 125k/350k logic cells (Xilinx Zynq 7030/7045) datasheet p.5
- GPIO lines
- 10 PL SE IO-1 (J18), single-ended input/output · datasheet p.18 8 PL SE IO-2 (J12), single-ended input/output, when RS485 is no… | 6 PS SE IO-1 (J4), multiplexed input/output (MIO)
- RAM type
- DDR3 datasheet p.5
- Program / boot memory
- 256 MB NOR flash · datasheet p.5
Each value is typed with its unit and measurement condition and cites the datasheet page it was taken from. Nothing is guessed: a field that is absent here has not been published by the manufacturer. machine-extracted ✓ checked by NewSpace Market ✓ manufacturer confirmed by the manufacturer.
As published by the supplier12 lines, in the manufacturer's own wording
- SoC
- Xilinx Zynq 7030/7045 Programmable SoC
- Processor
- Dual ARM Cortex A9 MPCore, up to 800 MHz
- FPGA module
- 125K / 350K logic cells
- Volatile Memory
- 1024 MB DDR3 (512 MB with ECC enabled)
- Non-volatile memory
- 256 MB NOR flash, 70 GB eMMC (pSLC), 233 GB eMMC (MLC)
- Mechanical dimensions
- 95 mm x 95 mm x 31.5 mm (with 3 x TR600)
- Mass
- 240 g
- Radiation
- 20 kRad TID
- SpaceWire
- x3
- USB
- x1
- Fully Configurable FPGA I/O
- 11 x LVDS pairs, 10 x I/O
- Conditionally Configurable FPGA I/O
- 12 x LVDS pairs (or Spacewire), 8 x I/O (or RS-485)
About
The NanoMind HP MK3 is a powerful On-board computer, designed to support high performance, yet efficient, on-board processing and H/W acceleration functions, needed to meet the increasing demands of complex payloads. This platform is a high-performance, versatile space-graded computer based on Xilinx’s Zynq®-7000 System on a Chip SoC family. The Zynq®-7030/45 parts integrate a dual-core ARM® Cortex™-A9 based processing system with a Xilinx FPGA in a single device, enabling rapid software prototyping and accelerating customer programmable hardware development. Typical customer applications include data reduction using compression algorithms, and Artificial Intelligence (AI) and Machine Learning (ML) for Earth Observation and Synthetic Aperture Radar (SAR) data processing. It also serves as a perfect H/W acceleration platform for Encryption and Error Correction for Command and Data security. With a wide range of interfaces, configurable I/O and support for in orbit updates, the NanoMind HP MK3 is a highly flexible and customizable platform, used in applications ranging from a general-purpose Onboard Computer (OBC) or Data Processing Unit (DPU) to a dedicated Payload Processor. The NanoMind MK3 has proven its reliability in flight as part of SDR MK3.
Documentation
- gs-ds-NanoMind_HP_MK3_DS_-_1036210_-_1_-_31_-_1.pdf PDF source: gomspace.com ↗
- gs-osf-NanoMind_HP_MK3_OSF_-_1039959_-_1_-_10_-_1.pdf PDF source: gomspace.com ↗
- Flyer_NanoMind_HP_MK3.pdf PDF source: gomspace.com ↗
Need the full ICD, test reports or a specific revision? Ask the supplier directly.