RGTR-A
RevGo
Ka-Band VSAT Transceiver — RGTR-A, frequency Tx 29.0-30.0GHz Rx 18.2-21.2GHz (Many band options available), output 10W.
Typed specifications74 values
Discloses 6 of 13 fields engineers filter by in this category (category median 3).
- Frequency band
- Ka RX · datasheet p.2 Ka TX
- Mass
- 1 400 g datasheet p.2 1 397.06 g
- Frequency range
- 18 200–20 200 MHz Rx Dual-Band · datasheet p.2 18 200–20 200 MHz Rx Frequency Dual-Band | 17 700–18 700 MHz Rx Frequency Quad-band | 950–2 150 MHz Rx output frequency | 950–1 950 MHz Rx output frequency (also 950-2150 MHz) +17
- Envelope (L×W×H)
- 150x140x58 mm datasheet p.1 5.90*5.51*1.97 inches | 150x140x58 mm
- TX RF output power
- 10 W Output Power · datasheet p.2 10 W Rated/Saturated | 7.94 W Plin1 | 5.01 W Plin2
- Supply voltage
- 12–24 V RX Input Power · datasheet p.2 12–24 V RX Power Supply | 12–24 V RX power supply (<15VDC L-Band; >16VDC H-Band) | 18–55 V TX Input Power | 18–55 V TX Power Supply
- Power consumption
- 60 W TX Prated (including Fan), typical · datasheet p.2 70 W Prated (including Fan) max | 60 W Prated (including Fan) typ. | 6 W RX Power Consumption | 6 W RX, Power Consumption +6
- Data interface
- RS422 datasheet p.2 RS-422 4-pin M&C (RS422/RS485) | other IF Connector | RS485 | RS-485 4-pin M&C (RS422/RS485)
- Operating temperature
- -40–60 °C datasheet p.2
- Function
- transceiver integrates 1xBUC, 1xLNB and an OMT · datasheet p.1
- Link use
- ground terminal satellite earth station / VSAT · datasheet p.1
- RF connector
- N IF Connector · datasheet p.2 F IF Connector, optional | F IF, F-Type (75 Ohm) optional | N IF, N-Type (50 Ohm)
- Power draw, transmit
- 60 W nom. · Prated (including fan), typ. · datasheet p.2 70 W max · Prated (including fan)
- Noise figure
- 1.5 dB nom. · Rx, typ. · datasheet p.2 1.6 dB max · Rx @20.2-21.2 GHz
- Connector
- MS connector 4-pin for power supply; TE T4130012081-000 4-pin for M&C (RS422/RS485) datasheet p.2 TE T4130012081-000 4-pin for M&C | N-Type IF Connector | F-Type IF Connector optional | 4-pin M&C +1
- Duplex
- full BUC + LNB + OMT · datasheet p.1
- RF gain
- 60 dB Rx gain · datasheet p.2 65 dB Tx small signal gain (50-65 dB, step 0.25 dB)
Each value is typed with its unit and measurement condition and cites the datasheet page it was taken from. Nothing is guessed: a field that is absent here has not been published by the manufacturer. machine-extracted ✓ checked by NewSpace Market ✓ manufacturer confirmed by the manufacturer.
As published by the supplier27 lines, in the manufacturer's own wording
- Frequency
- Tx 29.0-30.0 GHz Rx 18.2-21.2 GHz (Many band options available)
- Power/output
- 10 W
- Tx RF frequency
- 29.00-30.00 GHz
- If input frequency1
- 1400-2400 MHz
- External reference
- 10 MHz, 0±5 dBm
- Output power
- 10 W
- Rated/saturated
- 40 dBm
- Plin1
- 39 dBm
- Plin2
- 37 dBm
- Small signal gain
- 65 dB (50-65 dB, Step by 0.25 dB)
- Gain flatness
- 3 dB p-p/500 MHz; 1 dB p-p / 36 MHz
- Gain stability
- 3 dB p-p
- Output spurious
- -55 dBc
- Output frequency
- 950-1950 MHz/950-2150 MHz
- Lo frequency
- 16.75/17.5/18.25/19.25 GHz(For Quad-band)
- Switched by m&c
- 17.25/18.25 GHz(For Dual-band)
- Noise figure
- 1.5 dB typ., 1.6 dB max.@20.2-21.2 GHz
- P-1db
- 10 dB min.
- Gain
- 60 dB
- Image rejection
- 30 dB typ.
- Dimensions
- 5.90*5.51*1.97 Operating Temp -40 to +60 ℃
- Mass
- 3.08 Altitude 0-10,000 feet ASL lbs
- Input power
- 18 - 55 VDC Input Power +12 to +24 VDC
- Power consumption
- 10 W Power Consumption 6 W
- Prated (including Fan)
- 60 W typ. 70 W max
- Ms connector
- 4-Pin for Power supply
- Te t4130012081-000
- 4-pin for M&C (RS422/RS485)
About
RevGo Global’s RGTR-A is a ka-band vsat transceiver designed for satellite ground-segment (VSAT/SNG/maritime) RF chains, manufactured by RevGo Global Inc. (Reston, VA, USA), a satellite earth-station RF equipment manufacturer founded in 2002 and operating an ISO 9001:2015 quality system. This model operates over Tx 29.0-30.0GHz Rx 18.2-21.2GHz (Many band options available) with rated output/class of 10W. RevGo’s product line uses highly integrated RF technologies (RFIC and GaN), is designed for high-volume production, and is built for rugged outdoor operation (typ. -40 to +60C, 0-100% humidity condensing, up to 10,000 ft altitude). Typical applications include maritime VSAT terminals, 5G backhaul, SNG (satellite news gathering) vehicles, and fixed, portable, or transportable satellite terminals. Full RF, power, mechanical, and interface specifications are provided in the manufacturer’s datasheet linked below.
Documentation
Need the full ICD, test reports or a specific revision? Ask the supplier directly.