Space Hardware Marketplace

FoX Electronics Platform

• Form factor3U SpaceVPX modular platform
• Target orbitsLEO, MEO, GEO and cislunar
• CommunicationEthernet-based, supporting redundancy and high data rates

3U SpaceVPX modular avionics platform (Flexible On-board avioniX) of off-the-shelf modules for LEO, MEO, GEO and cislunar missions.

Remote Terminal Unit (RTU)

• RedundancyFully redundant
• FunctionBridge between OBC and platform/payload electronic interfaces
• Supported functionsStandard I/O, AOCS, propulsion

Fully redundant remote terminal unit bridging the on-board computer and platform and payload electronic interfaces.

Next Generation On Board Computer (OBC NG)

• Core ASICRadiation-hardened CREOLE chip developed by Beyond Gravity
• ProcessorFault-tolerant SPARC V8
• Integrated functionsCommunication functions, reconfiguration function, mass memory controller, extension possibilities

Radiation-hardened satellite on-board computer built around the Beyond Gravity CREOLE chip with fault-tolerant SPARC V8 processor.

FoX Payload Processor

• FunctionControl and data processing for payloads, instruments and robotics
• ProcessingSoftware and gateware processing, scalable to processing and storage needs
• PlatformPart of the FoX Electronics Platform (3U SpaceVPX)

High-performance processing unit for payloads, instruments and robotics, with scalable software and gateware processing.

Constellation Remote Terminal Unit (cRTU)

• FunctionBridge between On-Board Computer and platform electronic interfaces
• Board commonalitySame commercial I/O boards as the cOBC
• CustomizationAdditional modifications and new board types available on request

Customizable remote terminal unit bridging the on-board computer and platform electronic interfaces, based on the same COTS I/O…

Constellation On Board Computer (cOBC)

• ArchitectureComplete subsystem based entirely on commercial components
• RedundancyFully redundant, flight-proven FDIR
• Integrated functionsOn-board processing, GNSS receiver, ground communication, platform and payload interfaces

Fully redundant on-board computer subsystem built entirely from commercial components, with integrated GNSS receiver and platform/payload interfaces.

FoX NavRIX GEO GNSS Receiver

• ConstellationsGPS, Galileo
• Target orbitsGTO / GEO
• On-board navigation accuracyBelow 10 m 3D rms

Cost-efficient, optionally redundant software-defined GNSS receiver for commercial GTO/GEO missions, accurate to below 10 m 3D rms.

NavRIX Integral GNSS Receiver

• Supported GNSS signalsGPS L1 C/A, Galileo E1 B/C
• On-board position accuracy1.0 m 3D rms
• On-board velocity accuracy25 mm/s 3D rms

GNSS receiver function integrated into Beyond Gravity's next-generation on-board computer (cOBC), needing only an external antenna.

FoX NavRIX GNSS Receiver

• Supported GNSS signalsGPS L1 C/A, GPS L2C, GPS L5 I/Q, Galileo E1 B/C, Galileo E5a I/Q, Galileo E6 B/C (optional)
• On-board position accuracy< 1.0 m 3D rms
• On-board velocity accuracy< 2 mm/s 3D rms

Next-generation multi-frequency, multi-constellation GNSS receiver built on commercial components, with optional subscription-free PPP.

GEORIX GNSS Receiver

• Supported GNSS signalsGPS C/A on L1, Galileo E1 B/C
• Signal processing hardwareDedicated RF and Mixed-Signal ASICs plus AGGA-4 ASIC
• Position accuracy in GEO20.0 m 3D rms

Multi-constellation GNSS receiver for GTO/GEO missions with better than 20 m on-board real-time navigation accuracy in GEO.

LEORIX GNSS Receiver

• Supported GNSS signalsGPS L1 C/A, Galileo E1 B/C
• On-board position accuracy1.0 m 3D rms
• On-board velocity accuracy2 mm/s 3D rms

Multi-constellation single-frequency GNSS receiver for LEO with on-board real-time navigation accuracy below one metre.

PODRIX GNSS Receiver

• Supported GNSS signalsGPS L1 C/A, GPS L2C, GPS L5 I/Q, Galileo E1 B/C, Galileo E5a I/Q, Galileo E6 B/C (optional)
• On-board position accuracy< 1.0 m 3D rms
• On-board velocity accuracy< 2 mm/s 3D rms

High-performance spaceborne GNSS receiver with real-time navigation below 20 cm and Precise Orbit Determination to a few centimetres.

Beyond Gravity Separation Systems

Beyond Gravity offers a range of separation systems, dispenser systems, and modular payload adapters designed to securely connect…

Ariane 5 / Ariane 6 Structural Components and VESPA Satellite Adapter

Beyond Gravity (formerly RUAG Space) is a Swiss-Swedish space technology company providing structural components, avionics, and satellite dispenser…

Vega-C Payload Fairing

Beyond Gravity (formerly RUAG Space, rebranded in 2022) designs and manufactures payload fairings for European launch vehicles. For…

Sentinel-2 Satellite Structure

RUAG Space (now Beyond Gravity) is one of Europe’s leading suppliers of satellite structures and payload fairings. For…