GNSS Receivers — Space Hardware Marketplace

XRC

XRC (eXperimental Receiver Canvas) is an engineering software receiver that allows the processing of GNSS multiple signals in…

SRX-10i

• Compatible GNSS bandsGPS L1/Galileo E1/GLONASS G1, GPS L2/GLONASS G2, GPS L5/Galileo E5a/E5b/GLONASS G3
• Bandwidthup to 50 MHz (100 MHz aggregate)

SRX-10i is a competitive solution for simultaneous monitoring of up to two bands of the GNSS spectrum including…

NaviMoon

NaviMoon is SpacePNT's advanced autonomous GNSS receiver solution, delivering sub-100m accuracy at Moon distance and reducing reliance on…

NaviGEO

NaviGEO is SpacePNT’s high performance solution for launcher upper stages and in-orbit servicing vehicles, offering optimal GNSS visibility…

NaviLEO

NaviLEO is a high-performance GNSS receiver platform developed by SpacePNT, designed to meet the stringent needs and challenges…

piNAV-NG/FM (Flight Model)

The piNAV-NG/FM (Flight Model) is a 15 Channel GPS L1 C/A Receiver with a long-term optimized firmware based…

NanoSense GPS Kit

The NanoSense GPS Kit provides precise positioning, navigation, and timing for satellite missions, tailored for nanosatellites and integrating…

GNSS Patch Antenna L1/E1

A space-qualified GNSS patch antenna designed for secure navigation in space for CubeSats, NanoSats, and SmallSats.

FoX NavRIX GEO GNSS Receiver

• ConstellationsGPS, Galileo
• Target orbitsGTO / GEO
• On-board navigation accuracyBelow 10 m 3D rms

Cost-efficient, optionally redundant software-defined GNSS receiver for commercial GTO/GEO missions, accurate to below 10 m 3D rms.

NavRIX Integral GNSS Receiver

• Supported GNSS signalsGPS L1 C/A, Galileo E1 B/C
• On-board position accuracy1.0 m 3D rms
• On-board velocity accuracy25 mm/s 3D rms

GNSS receiver function integrated into Beyond Gravity's next-generation on-board computer (cOBC), needing only an external antenna.

FoX NavRIX GNSS Receiver

• Supported GNSS signalsGPS L1 C/A, GPS L2C, GPS L5 I/Q, Galileo E1 B/C, Galileo E5a I/Q, Galileo E6 B/C (optional)
• On-board position accuracy< 1.0 m 3D rms
• On-board velocity accuracy< 2 mm/s 3D rms

Next-generation multi-frequency, multi-constellation GNSS receiver built on commercial components, with optional subscription-free PPP.

GEORIX GNSS Receiver

• Supported GNSS signalsGPS C/A on L1, Galileo E1 B/C
• Signal processing hardwareDedicated RF and Mixed-Signal ASICs plus AGGA-4 ASIC
• Position accuracy in GEO20.0 m 3D rms

Multi-constellation GNSS receiver for GTO/GEO missions with better than 20 m on-board real-time navigation accuracy in GEO.

LEORIX GNSS Receiver

• Supported GNSS signalsGPS L1 C/A, Galileo E1 B/C
• On-board position accuracy1.0 m 3D rms
• On-board velocity accuracy2 mm/s 3D rms

Multi-constellation single-frequency GNSS receiver for LEO with on-board real-time navigation accuracy below one metre.

PODRIX GNSS Receiver

• Supported GNSS signalsGPS L1 C/A, GPS L2C, GPS L5 I/Q, Galileo E1 B/C, Galileo E5a I/Q, Galileo E6 B/C (optional)
• On-board position accuracy< 1.0 m 3D rms
• On-board velocity accuracy< 2 mm/s 3D rms

High-performance spaceborne GNSS receiver with real-time navigation below 20 cm and Precise Orbit Determination to a few centimetres.

eON HOME

• Orbit determinationOnboard, from GNSS measurements
• GuidanceOnboard trajectory computation and maneuver planning
• Cooperative navigationVia inter-satellite link (ISL)

Autonomous guidance and navigation unit for Earth-orbit satellites.

AmbaSat-1 Sensor 08

• Module dimensions9.7x10.1 mm
• Supported GNSSGPS, Glonass, BeiDou, QZSS

The AmbaSat-1 Sensor 08 pack includes a TESEO-LIV3R GNSS receiver module and an AmbaSat-1 Daughterboard with all necessary…

ISISPACE GNSS Patch Antenna

• Mass< 20 g
• Dimensions58 x 58 x 9.7 mm
• Operating temperature-20°C to +60°C

The ISISPACE GNSS Patch Antenna is a compact, low-mass, and flight-proven antenna designed for GPS-L1 and GALILEO-E1, offering…

SYNOPTES — Satellite-Based Precision Timing Device

• FunctionSpace-grade GNSS-disciplined oscillator for precision UTC time
• Timing accuracyNanosecond-class UTC synchronisation
• Signal sourcesMulti-constellation GNSS (GPS, GLONASS, Galileo, BeiDou)

SYNOPTES is RoInSpace’s space-grade precision timing and time-transfer device designed for applications requiring highly stable and accurate on-orbit…