HMC2003 3-Axis Magnetometer
Honeywell Aerospace
A high-sensitivity, factory-calibrated analog 3-axis magnetometer from Honeywell used for precision magnetic field measurement in navigation and attitude reference applications.
Typed specifications27 values
Discloses 7 of 11 fields engineers filter by in this category (category median 8).
- Measurement range
- 200 µT max · datasheet p.3 -200–200 µT field range, maximum magnetic flux density
- Envelope (L×W×H)
- 20-pin Wide DIP footprint, 1" by 0.75" printed circuit board datasheet p.2 11.94 mm Maximum A
- Resolution
- 4 nT 40 µgauss as printed · product page 4 nT features: 40 micro-gauss to ±2 gauss dynamic range | 4 nT typ., specification table
- Output data rate
- 1 000 Hz datasheet p.3
- Supply voltage
- 6 V min · datasheet p.3 15 V max | 6–15 V single supply operation
- Data interface
- other Analog Output · datasheet p.2
- Operating temperature
- -40 °C min · datasheet p.3 85 °C max | -40–85 °C operating
- Sensor type
- AMR permalloy magneto-resistive sensors (HMC1001 and HMC1002) · datasheet p.2
- Axes
- 3 datasheet p.2
- Output type
- analog factory calibrated analog outputs, 1 Volt/gauss (2.5V @ 0 gauss) · datasheet p.2
- Survival temperature
- -55 °C min · datasheet p.3 125 °C max | -55–125 °C storage
- Random vibration
- 2 g RMS typ., characterized · datasheet p.3
- Intended use
- other general low-field magnetometry, precision compassing, navigat… · datasheet p.2
- Linearity error
- 0.5 % typ., ±1 gauss applied field sweep · datasheet p.3 2 % typ., ±2 gauss applied field sweep | 2 % max · linearity error
- Bandwidth
- 1 000 Hz typ. · datasheet p.3
Each value is typed with its unit and measurement condition and cites the datasheet page it was taken from. Nothing is guessed: a field that is absent here has not been published by the manufacturer. machine-extracted ✓ checked by NewSpace Market ✓ manufacturer confirmed by the manufacturer.
As published by the supplier8 lines, in the manufacturer's own wording
- Axes
- 3 (X, Y, Z)
- Field range
- +/-2 gauss
- Resolution
- 40 microgauss
- Package
- 20-pin hybrid DIP
- Sensor elements
- HMC1001, HMC1002 magnetoresistive sensors
- Output
- Analog
- Signal conditioning
- 3x instrumentation amplifiers, 1 kHz low-pass filters
- Applications
- Low-field magnetometry, precision compassing, navigation, UAVs
About
The Honeywell HMC2003 is a high-sensitivity, factory-calibrated analog 3-axis magnetometer that uses Honeywell’s most sensitive magnetoresistive sensors—HMC1001 and HMC1002—to deliver reliable, precise magnetic field measurements. Its fully analog interface exposes critical nodes for maximum user flexibility, while the internal excitation current source and selected gain and offset resistors minimize temperature-related errors and drift. Three precision low-noise instrumentation amplifiers with 1kHz low-pass filters ensure accurate readings and effective noise rejection. Ideal applications include low-field magnetometry, precision compassing, navigation systems, UAVs, attitude reference, traffic and proximity detection, and medical devices.
Documentation
- hon-aero-n61-3127-000-001-3-axis-analog-magnetometer-datasheet-en.pdf PDF source: prod-edam.honeywellaerospace.com ↗
Need the full ICD, test reports or a specific revision? Ask the supplier directly.