BusCORE Groundstation
SkyFox Labs s.r.o.
50 W UHF amateur-band groundstation terminal matching BusCORE satellite radios, with variable bitrate modem, RF monitor port and 3U 19-inch rack chassis.
Key figurescomparable across the catalogue
- Power
- 50 W
- Data rate
- 0.001 Mbps
- Lead time
- 1.84 months
Normalised to common units so this product can be compared with others in its category. The supplier's own wording is below.
As published by the supplier
- Type
- State-of-the-art Hardware Accelerated Satellite Communication System
- Frequency band
- UHF 435.000-438.000 MHz (Amateur Radio Band)
- Modulation / bitrate
- 2GFSK, 1200-38400 bps variable
- RF output power
- 50 W SSPA @ 50 Ohms
- Rx sensitivity
- -120 dBm @ 1200 bps 5% PER; -106 dBm @ 38400 bps 5% PER
- Power requirement
- 13.8 V @ 8 A (50 W RF power out)
- Pc interface
- USB, 1,250,000 bps virtual COM port
- Connectors
- 1x N-Female UHF antenna port, 1x N-Female UHF monitor port, Amphenol 60V/26A power connector
- Chassis
- 3U 19-inch rack mount, cooling fan
- Operating temperature
- 0 to +70 degC
- Operational range
- up to 3000 km slant range, LEO up to h=1000 km
- Dual use goods
- YES
- Hs code
- 8517.62.90
- Lead time
- 6-8 weeks + shipping
- Country of origin
- Czech Republic
About
The BusCORE Groundstation Terminal is a full space-to-Earth, Earth-to-space radio communication infrastructure matched to the BusCORE Satellite RF Terminal, featuring a 50 W solid-state power amplifier, high sensitivity receiver, variable-bitrate modulator/demodulator, fast solid-state RX/TX switch, an RF monitor output for an external spectrum analyzer, and a USB interface to the control PC. It operates in the UHF amateur band 435.000-438.000 MHz with 2GFSK modulation at variable bitrates from 1200 to 38,400 bps, automatic bitrate fallback to 4800 bps nominal, and automatic AFC without Doppler compensation at 4800-38400 bps. Since March 2026 it provides full standalone hardware support for bidirectional 9600 bps AX.25/G3RUH-framed legacy amateur radio satellite links at -106 dBm 5% PER sensitivity. Receive sensitivity reaches -120 dBm at 1200 bps and -106 dBm at 38400 bps (5% PER), with up to 3000 km slant range for LEO satellites up to 1000 km altitude. The unit includes a harmonic filter SSPA rated 50 W at 50 ohms, forward/reflected power measurement, a no-antenna-tolerant SSPA, a 2-line RGB-backlit status LCD, indicator LEDs, an embedded speaker with volume control, squelch gate, and an optically isolated USB interface with a 1,250,000 bps virtual COM port. It is powered at 13.8 V @ 8 A (50 W RF out), housed in a 3U 19-inch rack-mount chassis with a cooling fan, N-Female antenna and monitor ports, and an Amphenol base-station 60V/26A power connector, rated 0 to +70 degC.
Documentation
No public datasheet yet — request the datasheet / ICD from the supplier.