EVO-RSA Rev B
AVCOM of Virginia
The EVO-RSA is a rack-mount, extended-band RF spectrum analyzer with up to 12 inputs, built on a new DSP/FPGA platform for reliable signal monitoring and control in satcom ground-segment applications.
Key figurescomparable across the catalogue
- Mass
- 3.27 kg
- Largest dimension
- 482.6 mm
Normalised to common units so this product can be compared with others in its category. The supplier's own wording is below.
As published by the supplier
- Input connectors
- SMA, BNC, F, and/or N
- Nominal input impedance
- 50 Ω (SMA, BNC, N); 75 Ω (F)
- Max DC input voltage
- 25 V
- Input frequency range - model 2290
- 900 MHz to 2200 MHz
- Input frequency range - model 3040
- 400 MHz to 3000 MHz
- Input frequency range - model 6070
- 70 MHz to 6000 MHz
- Max span width
- 1300 MHz
- Min tuning step size
- 1 kHz
- Resolution bandwidth
- 1 kHz, 3 kHz, 10 kHz, 30 kHz, 100 kHz, 300 kHz, 1 MHz
- Reference levels
- -40 dBm, -30 dBm, -20 dBm, -10 dBm
- Maximum input power level
- -10 dBm
- RF sensitivity (-40 REF LVL)
- -100 dBm
- Spur free dynamic range (3kHz RBW)
- 60 dB
- Noise floor (-40 REF LVL, 3kHz RBW)
- -100 dBm, -134 dB/Hz
- Noise floor (-10 REF LVL, 3kHz RBW)
- -70 dBm, -104 dB/Hz
- Isolation between inputs
- >40 dB typical
- Amplitude accuracy
- +/- 1 dB typical
- Frequency accuracy
- +/- 1 kHz typical
- Phase noise @ 2 ghz, 10 khz offset
- -100 dBc/Hz
- Phase noise @ 2 ghz, 100 khz offset
- -100 dBc/Hz
- Phase noise @ 2 ghz, 1 mhz offset
- -109 dBc/Hz
- Ethernet
- 10/100, DHCP or Static, RJ45
- USB
- 115200 8n1, USB-B
- M&c via evo gui
- Ethernet: Yes; USB: Yes
- M&c via posix-c api sbs2api
- Ethernet: Yes; USB: Yes
- M&c via web-gui
- Ethernet: Yes; USB: N/A
- Power connector
- Power Barrel Connector Jack
- Power supply
- 15 VDC, 0.5 A
- Dimensions
- 1 RU, 19 in. x 18.13 in. x 1.72 in. (48.26 cm x 46.04 cm x 4.37 cm)
- Mass
- 7.2 lbs, 3.27 kg
- Operating temperature
- 0°C to 50°C
- Storage temperature
- -40°C to 85°C
- Humidity
- 0 to 95%, non-condensing
- Max operating altitude
- 40,000 ft; 12,000 m
About
The EVO-RSA is a spectrum analyzer designed on a completely new platform to meet current system challenges. It employs high-performance DSP and FPGAs to deliver strong RF monitoring performance and reliable operation in rackmount applications. The unit supports up to 12 RF inputs and is offered with L-Band and extended frequency band options across three models (2290: 900-2200 MHz, 3040: 400-3000 MHz, 6070: 70-6000 MHz). It connects via Ethernet or USB and supports multiple monitoring and control (M&C) interfaces, including a WEB-GUI, a POSIX-C API (SBS2API), and Avcom’s own EVO GUI, making it suitable for integration with custom M&C systems or for use with existing Avcom applications. Input connectors are available in SMA, BNC, F, and/or N types, with 2, 4, and 6 input models following one layout and 8, 10, and 12 input models following another; inputs ordered above the populated number are left unpopulated. The unit is housed in a 1U rackmount chassis and is powered via a barrel connector jack from a 15 VDC, 0.5A supply. It is rated for operation from 0°C to 50°C, storage from -40°C to 85°C, humidity up to 95% non-condensing, and a maximum operating altitude of 40,000 ft (12,000 m).
Documentation
- Product Data Avcom EVO-RSA_RevB_v1.1.pdf PDF source: www.avcomofva.com ↗
- EVO_GUI_UserGuide.pdf PDF source: www.avcomofva.com ↗
Need the full ICD, test reports or a specific revision? Ask the supplier directly.