EMXYS Ground Station
Emxys
The EMXYS Ground Station is a 19-inch rack-mounted terrestrial radio station for satellite communications, featuring an embedded computer, SDR, and optional rotor for satellite tracking.
Typed specifications36 values
Discloses 4 of 13 fields engineers filter by in this category (category median 2).
- Frequency bands
- UHF covering most satellite bands including UHF, VHF and S · datasheet p.1 UHF RX | UHF TX | VHF covering most satellite bands including UHF, VHF and S | VHF RX +2
- Mass
- 50 kg datasheet p.2
- Frequency range
- 400 MHz min · TX · datasheet p.2 3 500 MHz max · RX | 3 500 MHz max · Rx frequency band up to | 480 MHz max · TX | 400–480 MHz Tx frequency band (can be modified on request)
- Envelope (L×W×H)
- 82 cm x 54 cm x 50 cm datasheet p.2
- Supply voltage
- 220 V product page
- Power consumption
- 60 W product page
- Data interface
- Ethernet datasheet p.1 Ethernet gigabit switch, TCP/IP, 14 RJ45 | USB two USB2.0, one USB3.0 | USB
- Operating temperature
- -20 °C product page -40 °C
- Offering
- turnkey station terrestrial radio station, 19-inch rack with SDR, tracking so… · datasheet p.1
- Protocols and standards
- AX.25 AX25/HDLC by default · datasheet p.2
- Modulations supported
- FSK user-configurable, implemented by default · datasheet p.2 BPSK user-configurable, implemented by default
- Amplifier gain
- 34 dB Tx gain · datasheet p.2
- Connector
- RJ45 datasheet p.2 USB2.0 | USB3.0 | HDMI | D-Sub 9 +3
- Survival temperature
- -40 °C product page
Each value is typed with its unit and measurement condition and cites the datasheet page it was taken from. Nothing is guessed: a field that is absent here has not been published by the manufacturer. machine-extracted ✓ checked by NewSpace Market ✓ manufacturer confirmed by the manufacturer.
As published by the supplier28 lines, in the manufacturer's own wording
- Sdr over ethernet
- Yes
- Enclosure
- 19 inch standard
- Satellite tracking
- Yes
- Software included for telemetry and telecommand
- Open source COSMOS
- Software included for satellite tracking and rotor control
- Open source Gpredict
- Network implementation
- Local network to receive/transmit data and receive RF samples
- Connection system
- TCP/IP protocol with Ethernet gigabit switch
- Data link packaging
- User definable (AX25/HDLC implemented by default)
- Modulations
- User definable (FSK, BPSK implemented by default)
- Additional blocks
- Possibility of adding scrambling and user python code implementation
- Doppler effect control
- Yes
- Receiver frequency band
- up to 3.5 GHz
- Transmission frequency band
- 400 MHz to 480 MHz (Possibility of modifying on demand)
- Transmission gain
- 34 dB
- Protection
- AC overcurrent and leakage current protection
- Communication
- Half-duplex
- Rotor precision
- 0.1º
- Antenna switch selector
- DB9 connector with 12 V, 50 mA
- Supply voltage
- 220 VAC
- Power frequency
- 50 Hz
- Operating ambient temperature range
- –20°C to +70°C
- Storage temperature range
- –40°C to 85°C
- Maximum output power
- 60 W
- Compliance
- 19 inches standard
- Rack size
- 15U
- Depth
- 500 mm
- Dimensions
- 820 x 540 x 500 mm
- Mass
- 50Kg
About
The EMXYS Ground Station (EGS) is a terrestrial radio station designed for satellite communications. It features a main transceiver based on an embedded computer connected to a software-defined radio (SDR) device, covering most satellite bands including UHF, VHF, and S bands. The EGS is presented in a 19-inch rack standard enclosure and is controlled from a standard computer capable of performing baseband signal processing. By default, it is designed to work with the spid BIG-RAS-HR rotor for antenna positioning, which is controlled from a module within the rack using open-source GPredict software for automatic azimuth and elevation angle control. The rotor is included, but the EGS module can be purchased without it. The system includes open-source COSMOS software for telemetry and telecommand and GPredict for satellite tracking and rotor control. It implements a local network for data transmission/reception and RF sample reception, with a connection system via TCP/IP protocol with an Ethernet gigabit switch. Users can define data link packaging (AX25/HDLC by default) and modulations (FSK, BPSK by default), and add other blocks like scrambling and user Python code. It also features Doppler effect control, AC overcurrent and leakage current protection, and half-duplex communication.
Documentation
Need the full ICD, test reports or a specific revision? Ask the supplier directly.