Mag648 / Mag649®
Bartington Instruments
The Mag648 and Mag649 are compact, low-noise, three-axis fluxgate sensors designed for magnetic field measurements from DC up to 1kHz, ideal for battery-powered applications.
Typed specifications50 values
Discloses 10 of 11 fields engineers filter by in this category (category median 8).
- Mass
- 120 g datasheet p.5 120 g Mag648/649 standard and FL, approximate | 330 g Mag648S / Mag649S, approximate | 330 g Mag648S/Mag649S (approximate) | 200 g Mag648U / Mag649U, approximate +1
- Measurement range
- 60 µT datasheet p.4 60 µT Mag648 | 100 µT Mag648 and Mag649, ±100μT option | 60 µT Mag648 and Mag649, ±60μT option | 200 µT Mag649 only, ±200μT option +1
- Envelope (L×W×H)
- 30 x 32 x 70mm datasheet p.5 30 x 32 x 70mm (W x H x L, excl. cable) Mag648/649 standard and FL | 40 x 40 x 141mm Mag648S / Mag649S submersible | 40 x 40 x 141mm Mag648S/Mag649S (W x H x L) | 29 x 23 x 66mm Mag648U / Mag649U unpackaged +1
- Resolution
- 100 nT Offset (in zero field) · datasheet p.4
- Output data rate
- 1 000 Hz datasheet p.4 30 Hz Bandwidth (-3dB): Mag648
- Noise density
- 0.01 nT/√Hz max · Mag649L low noise, at 1Hz · datasheet p.4 0.01–0.05 nT/√Hz Mag648B / Mag649B basic noise, at 1Hz
- Supply voltage
- 3.5–15 V DC · datasheet p.5
- Power consumption
- 0.01 W datasheet p.5 0.011 W Mag648 (basic noise) in zero field | 0.019 W Mag649® (low noise & ±200μT) in zero field | 0.015 W max · low power: <15mW consumption
- Operating temperature
- -40–70 °C datasheet p.5
- Sensor type
- fluxgate three-axis fluxgate sensors · datasheet p.2
- Axes
- 3 right hand XYZ co-ordinate system · datasheet p.4
- Output type
- analog ±3V balanced differential, each output 0.15V to 3.15V · datasheet p.5
- Connector
- Binder 99 9125 00 08 datasheet p.5 Binder 99 9125 00 08 Mag648 / Mag649 standard | Flying leads 8x0.22mm2 Mag648FL / Mag649FL | Flying leads 8x0.22mm Mag648FL/Mag649FL | SubConn MCBH10FNM Mag648S / Mag649S +3
- Survival temperature
- -40–60 °C datasheet p.5 -40–60 °C storage
- Intended use
- other surveillance systems, magnetic field measurements in remote l… · datasheet p.3
- Configuration
- integrated (sensor + electronics) standard / flying lead / submersible / unpackaged versions · datasheet p.5
- Zero offset
- 100 nT Offset (in zero field) · datasheet p.4 100 nT offset in zero field ±100nT
- Linearity error
- 0.003 % least squares fit · datasheet p.4
- Axis orthogonality error
- 1 ° max · datasheet p.4
- Bandwidth
- 30 Hz min · Mag648, -3dB · datasheet p.4 1 Hz min · Mag649, -3dB
Each value is typed with its unit and measurement condition and cites the datasheet page it was taken from. Nothing is guessed: a field that is absent here has not been published by the manufacturer. machine-extracted ✓ checked by NewSpace Market ✓ manufacturer confirmed by the manufacturer.
As published by the supplier20 lines, in the manufacturer's own wording
- Power consumption
- <15 mW
- Noise (low noise version)
- <10pTrms/√Hz at 1 Hz
- Bandwidth (Mag648)
- to 30 Hz
- Bandwidth (Mag649®)
- to 1 kHz
- Measuring range
- ±60µT or ±100µT
- Number of axes
- Three (right hand XYZ co-ordinate system)
- Polarity
- +ve non-inverting output when pointing North
- Bandwidth
- >1 kHz
- Measurement noise floor
- ≤10pTrms/√Hz at 1 Hz
- Scaling
- 50 mV/μT, 30 mV/μT, 15 mV/μT
- Scaling temperature coefficient
- 100ppm/°C
- Start-up time
- 150 ms
- Warm-up time
- 15mins
- Offset (in zero field)
- ±100nT
- Scaling error
- ±0.5% at DC
- Orthogonality error
- <1°
- Linearity error
- 0.0033% (least squares fit)
- Frequency response (<5% deviation from DC)
- DC to 100 Hz
- Hysteresis
- <2nT at 1 x full scale (when powered)
- Excitation breakthrough
- <20 mV pk-pk at 8.192 kHz typical
About
The Mag648 and Mag649 three-axis fluxgate sensors from Bartington Instruments provide low noise magnetic field measurements across a frequency range from DC up to 1kHz. These sensors are characterized by exceptionally low power consumption, typically less than 15mW, and a compact size, making them highly suitable for applications where battery power is critical. Such applications include surveillance systems, remote deployment scenarios, and vehicle monitoring. The Mag648 offers a bandwidth up to 30Hz, while the Mag649® extends this to 1kHz. Both models are available in standard, submersible, and unpackaged versions, offering flexibility for various integration needs. They provide a measuring range of either ±60µT or ±100µT, with a low noise version achieving less than 10pTrms/√Hz at 1Hz. These features make them versatile for a range of demanding magnetic sensing tasks.
Documentation
- DS2298.pdf PDF source: www.bartingtondownloads.com ↗
- OM2298.pdf PDF source: www.bartingtondownloads.com ↗
- DR2389.pdf PDF source: www.bartingtondownloads.com ↗
Need the full ICD, test reports or a specific revision? Ask the supplier directly.