piPATCH-ADSB
SkyFox Labs s.r.o.
High-gain, non-deployable CubeSat ADS-B antenna covering the 1090 MHz band via a single RF port for space-borne aircraft tracking.
Key figurescomparable across the catalogue
- Mass
- 0.115 kg
- Largest dimension
- 98 mm
- Lead time
- 0.921 months
Normalised to common units so this product can be compared with others in its category. The supplier's own wording is below.
As published by the supplier
- Type
- High Gain Non-Deployable ADS-B Antenna
- Operating frequency
- 1090 MHz (center), 50 Ohms
- RF port
- Single RF port
- Dimensions
- 98x82.6x(+8/-4) mm, low profile, MCX-F connector
- Mass
- 115 g (excluding mounting screws)
- Mounting
- fits deployers with 10 mm side protrusions (e.g. Exopod Nova)
- Dual use goods
- YES
- Hs code
- 8529.10.69
- Lead time
- 2-4 weeks + shipping
- Country of origin
- Czech Republic
About
The piPATCH-ADSB is a Space-Friendly, top-notch, high-gain RHCP antenna array with a uniform hemispherical radiation pattern intended for CubeSat installations supporting space-borne Automatic Dependent Surveillance-Broadcast (ADS-B) aircraft tracking. It covers the 1090 MHz band via a dedicated antenna array connected to the receiver through a single RF port, and is ideal for Nadir/Zenith-oriented satellites such as ground-scanning missions, ensuring orientation toward terrestrial sources with an X/Y face. The module measures 98×82.6x(+8/-4) mm with a low profile and MCX-F connector, weighs 115 g, and fits deployers with 10 mm side protrusions such as Exopod Nova; mounting hole positions can be modified free of charge on request. RF coupling and EMI shielding are built in. Offered as Flight Model (FM) and unmarked OEM Flight Model variants.
Documentation
Need the full ICD, test reports or a specific revision? Ask the supplier directly.