Space Hardware Marketplace

Remove-Before-Flight (RBF) Bracket Kit

• MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)
• Compatible chassis walls sizes1.5U, 2U, 3U
• Mounting fasteners2x external M3 screws to Chassis Walls

A precision aluminum bracket used in 1.5U/2U/3U CubeSat Kit structures to support and guide the Remove-Before-Flight pin, power…

Mid-plane Standoff Kit

• Kit contents4 unique precision hard-anodized aluminum pieces + fastening hardware
• FunctionCouples threaded-rod columns of module stack to Chassis Walls; restrains X/Y motion under vibration
• Compatible chassis walls sizes1U, 1.5U, 2U, 3U (pre-drilled mounting holes); usable in 1U when space permits

A hard-anodized aluminum standoff kit that couples the four threaded-rod columns of a CubeSat electronics module stack to…

CubeSat Kit™ Base Plate Assembly

• Configuration option: typeSolid-Wall, Skeletonized
• Configuration option: separation switchSingle (deprecated), Dual
• MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)

A precision aluminum end-plate assembly that forms the Motherboard Module (MBM)/C&DH end of a CubeSat Kit structure, available…

CubeSat Kit™ Chassis Walls

• Configuration option: size0.5U, 1U, 1.5U, 2U, 3U
• Configuration option: typeSolid-Wall, Skeletonized
• MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)

Pumpkin's pioneering one-piece sheet-metal CubeSat structural element, available in 0.5U-3U sizes, that forms the primary chassis of a…

CubeSat Kit for Microchip PIC24 MCUs w/USB OTG

• McuMicrochip PIC24FJ256GB210, low-power 16-bit, with USB OTG
• Processor modulePluggable Socketed Processor Module E (PSPM E) with PIC24FJ256GB210
• Processor module variantPluggable Processor Module E1 (PPM E1)

Pumpkin's complete CubeSat bus kit built around the Microchip PIC24FJ256GB210 low-power 16-bit MCU with USB On-The-Go support, bundling…

CubeSat Kit for Microchip dsPIC33 DSCs

• DscMicrochip dsPIC33FJ256GB210, low-power 16-bit Digital Signal Controller
• Processor modulePluggable Socketed Processor Module D (PSPM D) with dsPIC33FJ256GP710
• Processor module variantPluggable Processor Module D2 (PPM D2)

Pumpkin's complete CubeSat bus kit built around the Microchip dsPIC33FJ256GB210 low-power 16-bit Digital Signal Controller, bundling structure, C&DH…

CubeSat Kit™ Cover Plate Assembly

• Configuration option: typeSolid-Wall, Skeletonized
• MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)
• Mounting fasteners4x M3 flathead stainless-steel screws

A precision aluminum end-plate assembly that forms the payload end of a CubeSat Kit structure, secured to the…

Rackmount SUPERNOVA Satellite Simulator (RS3)

A low-cost, portable 2U rackmount satellite simulator hosting a SUPERNOVA-based satellite simulator electronics stack running a stripped-down version…

CubeSat Kit Quad-switch Cover Plate Assembly

• MaterialAl 5052-H32, plated per CubeSat Design Specification (CDS)
• Mounting screwsFour M3 flathead stainless-steel screws
• Number of switchesFour independent separation/inhibit switches (3 usable on standard CubeSat Kit chassis; 4 on CubeSat Kit Pro)

A flight-qualified cover plate for CubeSat Kit structures permitting the use of up to four separation/inhibit switches, installable…

CubeSat Kit for Microchip PIC24 MCUs

• McuMicrochip PIC24FJ256GA110, low-power 16-bit
• Processor modulePluggable Socketed Processor Module D (PSPM D) with PIC24FJ256GA110
• Processor module variantPluggable Processor Module D1 (PPM D1)

Pumpkin's complete CubeSat bus kit built around the Microchip PIC24FJ256GA110 low-power 16-bit MCU, bundling structure, command & data…

104-pin Bus Reversing Adapter

• Connector104-pin CubeSat bus, stackthrough on one side, standard header on reversed side
• All pins passed through104 of 104 pins routed straight through
• Included hardware3D-printed plastic support arms, miscellaneous M3 fasteners

A development tool that allows a CubeSat Kit-compatible module to be installed upside-down on the 104-pin CubeSat bus,…

Development Board 2 (DB2)

• Bus connectorsTwo interconnected 104-pin CubeSat bus connectors with M3 standoffs
• Module stacks supportedTwo
• Debug header10-pin header for Total Phase I2C host adapters/protocol analyzers (I2C, first SPI bus signals, signal ground)

A simple development tool board for CubeSat modules conforming to the 104-pin CubeSat bus standard, used to characterize…

Lunar Rover Solar Panel

• Example configuration72-cell, 6x10S1P + 1x12S1P solar panel
• Example driven loadPumpkin EPSM 1 with two 100 Wh BM2 battery modules (not included)
• RoutingSingle-layer maze routing, no vias

A custom PMDSAS solar array configured to the design constraints of a customer's lunar rover, with custom solar…

High-power Multi-channel Electrical Power System Module (EPSM1)

A high-performance, highly efficient FPGA-driven, GaNFET-based multichannel power system module for small satellites, handling up to 480W of…

135W Dual Articulated Deployable Solar Array

A compact, deployable 135W solar array with two single-motor Solar Array Drive Assemblies (SADAs) driving independently steerable 67W…

CubeSat Kit™ Large Aperture Base Plate Assembly, Dual Switch

• SKU710-02203
• Price$820.00 per item
• MaterialAl 5052-H32

A precision-machined aluminum base plate assembly for the CubeSat Kit structure, designed for use with the Motherboard Module…

2nd Switch (L2) Spring Upgrade Kit

• SKU711-01478
• CompatibilityRev-E or later motherboard modules
• Flight heritageFlight Hardware | Flight Qualified | Space Proven

The 2nd Switch (L2) Spring Upgrade Kit provides hardware parts to enhance the spring strength of the second…

220W Deployable Clamshell Solar Array (DCSA)

A compact 7U-stowed deployable solar array that unfolds into a 24-panel, 192-cell array delivering up to 220W of…