Test Equipment & EGSE — Space Hardware Marketplace — Page 6

Test Equipment & EGSE

Mechanical Shock Testing Services

Experior Laboratories

Classical shockUp to 1,500 G
Horizontal shock systemUp to 5,000 G on parts over 500 lb
SRS Shaker Shock (T2000)Up to 5,000 G

Classical, pyroshock, and high-G shock testing — up to 10,000+ G via Lansmont P30, proprietary KIPS pyroshock simulation…

Test Equipment & EGSE

Thermal Vacuum Testing (TVAC)

Experior Laboratories

Vacuum level10⁻⁷ torr
Temperature range±150°C
Chamber #1 (Diversified Vacuum 3600)36"x54" inner volume

Thermal vacuum chamber testing simulating space conditions — vacuum to 10⁻⁷ torr, temperature cycling ±150°C, multiple chamber sizes.

Test Equipment & EGSE

Direct Field Acoustic Testing (DFAT)

Experior Laboratories

Process timeLoad-in to load-out in ≤4 days for large satellite
Control systemDF-ACS (m+p international)
Simulation integrationDassault Systemes Wave6 vibroacoustic platform

High-intensity acoustic launch-simulation testing using the Acoustic Research Systems NEUTRON System — full satellite DFAT process in 4…

Test Equipment & EGSE

TDEMI M+ Ultra-Mobile EMI Receiver

GAUSS Instruments

Speed16,000x faster than conventional receivers
Real-time bandwidth225 MHz
Frequency ranges10 Hz to 1/3/6/7 GHz

Ultra-mobile, stand-alone EMI receiver — 225 MHz real-time bandwidth, 16,000x faster than conventional receivers, MIL/DO-160 compliant.

Test Equipment & EGSE

TDEMI X Real-Time EMC Receiver

GAUSS Instruments

Frequency range10 Hz (option) / 9 kHz standard up to 40 GHz
Real-time bandwidth645 MHz
Dynamic range>100 dB (0dB attn) up to >170 dB with stepped attenuator

Modular, upgradable real-time EMC receiver covering 10Hz to 40GHz — supports civil, military (MIL-461G), and avionic (DO-160) standards.

Test Equipment & EGSE

EMI64k Test Automation Software

GAUSS Instruments

ModulesEMI64k Basic, GTEM, SLIDE, Rad, RadUF, MDM packages
GTEM scan time<10s with quasi-peak detector
OS supportFull 64-bit, multi-core

Full test-automation software suite for TDEMI EMC receivers — supports CISPR/FCC/ANSI/MIL/DO-160 standards with 3-axis/6-axis scanning.

Test Equipment & EGSE

TDEMI S Portable EMI Receiver

GAUSS Instruments

Real-time IQ analysis bandwidthUp to 510 MHz
Interface10.1" touchscreen
Power+12V supply, battery-driven option

Portable/mobile EMI receiver with up to 510 MHz real-time IQ analysis bandwidth — 10.1" touchscreen, battery-driven option.

Test Equipment & EGSE

TDEMI Ultimate EMC/EMI Receiver

GAUSS Instruments

Frequency rangeDC up to 44 GHz
Real-time bandwidth345 MHz standard (685/1000 MHz optional)
Speed128,000x faster than conventional receivers

Top-of-the-line FFT-based real-time EMC/EMI measurement receiver up to 44 GHz — 128,000x faster than conventional receivers, CISPR 16-1-1…

Test Equipment & EGSE

FlatSat Ground Test Rig

HEX20

PC-104 slots6 (CDH, EPS, COMMs, Interface Card, 2 spares)
Bus-probing connectors2
Antenna pass-throughs2x SMA-SMA with 30dB attenuator (VHF/UHF)

Ground-based hardware-in-the-loop test rig for validating satellite payloads and subsystems before flight — 6 PC-104 slots, ground-station simulator…

Test Equipment & EGSE

Space Qualified Coaxial Termination

KRYTAR

Model T1M-SQDC-20.0 GHz, 1.05 max VSWR, 3.5mm male
Model T2M-SQTo 26.5 GHz
Model T3M-SQTo 40.0 GHz

Rugged mechanical-design coaxial terminations rated for space use — models spanning DC to 40 GHz, low VSWR, 3.5mm…

Test Equipment & EGSE

Tpod M CubeSat Test Fixture

LAUNCH42

SizeTPOD-M
Supported CubeSat Size6U / 8U
Lead time4 weeks

Fully assembled CubeSat test fixture (TPOD-M) from Launch42, supporting 6U/8U CubeSats for integration and pre-launch test campaigns.

Test Equipment & EGSE

Tpod L CubeSat Test Fixture

LAUNCH42

SizeTPOD-L
Supported CubeSat Size12U / 16U
Lead time4 weeks

Fully assembled CubeSat test fixture (TPOD-L) from Launch42, supporting 12U/16U CubeSats for integration and pre-launch test campaigns.

Test Equipment & EGSE

Tpod S CubeSat Test Fixture

LAUNCH42

Supported CubeSat sizes1U/2U/3U/3U XL/4U
Lead time4 weeks
IncludesUser manual, 3 hours remote engineering support, EU delivery

Test-fit dispenser covering 5 CubeSat form factors in a single unit — 1U/2U/3U/3U XL/4U, includes 3 hours of…

Test Equipment & EGSE

Test Data Manager (TDM)

Leanspace

FunctionCentralized test data archive, traceability, and analysis
IntegrationStandardized interfaces connecting legacy test systems

Centralizes and analyzes hardware test-campaign data across test benches for satellite integration and testing — full traceability with…

Test Equipment & EGSE

Environmental Testing Services

Needronix

Test typesTVAC, vibration, shock, EMC/EMI
FacilityIn-house test equipment
OutputFull test reports for mission assurance

Space environmental qualification testing for CubeSats and components — thermal vacuum (TVAC), vibration, shock, and EMC/EMI testing services…

Test Equipment & EGSE

High-Vacuum Testing Service

OhmSpace

Minimum pressure1×10⁻⁶ mbar
Facility typeHigh vacuum chamber
Use casesThruster testing, component qualification, outgassing, functional vacuum testing

Specialized vacuum chamber testing service available to external customers, achieving pressures down to 1×10⁻⁶ mbar for space component…

Test Equipment & EGSE

Large Gantry Printing System

Space Foundry

ProcessSingle-step atmospheric-pressure plasma jet printing
FormatGantry-integrated, large-format
ApplicationsLarge-format aerospace structures, production integration

Gantry-integrated plasma jet printer for large-format conformal electronics printing on aerospace structures.

Test Equipment & EGSE

Robotic Arm Integration Printer

Space Foundry

ProcessSingle-step atmospheric-pressure plasma jet printing, orientation independent
IntegrationRobotic arm-mounted print head, OEM integration supported
ApplicationsComplex 3D parts, upside-down printing, aerospace manufacturing

Plasma jet print head integrated onto a robotic arm for conformal printing on complex 3D aerospace parts, including…