Test Equipment & EGSE — Space Hardware Marketplace

SatSim — Satellite Pass Emulator

• FunctionOrbital trajectory emulation via UAV
• Supported OrbitsLEO and MEO
• Trajectory InputTLE-based or custom pass definition

UAV-based satellite pass emulator that flies real orbital trajectories for LEO/MEO satellites, enabling end-to-end RF link testing and…

QS RF Measurement System (QS 1-18 DL)

• Frequency Range1–18 GHz
• Link DirectionDownlink (DL)
• Measurement MethodUAV-based far-field pattern measurement

UAV-based RF antenna measurement system for satellite ground stations, covering 1–18 GHz (downlink), providing far-field pattern data without…

QS RF Locator

• FunctionDrone-based RF interference localization
• PlatformAutonomous UAV (drone)
• CapabilitySpatial triangulation of RFI sources

Drone-based RF direction-finding system that locates sources of RF interference, RFI, and signal degradation on ground station antennas…

QS RF Measurement System (QS 6-24 DL)

• Frequency Range6–24 GHz
• Link DirectionDownlink (DL)
• Measurement MethodUAV-based far-field pattern measurement

UAV-based satellite antenna measurement system covering 6–24 GHz (C, Ku, Ka-band) downlink — drone flies precision trajectories for…

Load Board

• SKU711-00651
• Category (site breadcrumb)CubeSat Kit Accessories
• CAD/Datasheet file name (no link provided)Load Board A

A CubeSat Kit Accessories module (Load Board A) sold by Pumpkin for use during CubeSat integration and test.

Rackmount SUPERNOVA Satellite Simulator (RS3)

A low-cost, portable 2U rackmount satellite simulator hosting a SUPERNOVA-based satellite simulator electronics stack running a stripped-down version…

Flight Switch Simulator Module

• Simulated RBF switches1
• Simulated Separation switchesUp to 3
• Switch logic combinationAND / OR via user-settable jumpers

A CubeSat Kit test module that simulates one Remove-Before-Flight switch and up to three separation switches, electrically compatible…

Load Module

A CubeSat Kit accessory module that exposes VBATT, +5V_SYS and VCC_SYS power buses on banana jacks and connectors…

USB Debug Adapter

A USB-to-serial debug adapter that provides a debugging terminal interface and optional power to Pumpkin CubeSat Kit modules…

JFPC-MSP430 Programming Adapter

• SKU634-00334
• Connector A2x7 0.100" pitch header (14-pin JTAG, mates with TI MSP430 FET)
• Connector B8-pin flat printed circuit cable (FPC)

A programming/debug adapter cable that connects a TI MSP430 Flash Emulation Tool (FET) to a Pluggable Processor Module…

JFPC-C8051 Programming Adapter

• SKU710-00488
• Connector A2x5 0.100" pitch header (10-pin JTAG, mates with Silicon Labs USB Debug Adapter)
• Connector B8-pin flat printed circuit cable (FPC)

A programming/debug adapter cable that connects a Silicon Labs USB Debug Adapter to a Pluggable Processor Module (PPM)…

Silicon Labs USB Debug Adapter

• SKU633-00489
• Hardware ClassDevelopment Hardware
• Compatible WithSilicon Labs C8051F120 (PSPM B / PPM B1); JFPC-C8051 Programming Adapter

A USB-based JTAG debug adapter for programming and debugging Silicon Labs C8051-family microcontrollers used in Pumpkin's CubeSat Kit…

Total Phase Beagle I2C/SPI Protocol Analyzer

• SKU634-00522

A Total Phase Beagle I2C/SPI Protocol Analyzer resold by Pumpkin as a CubeSat Kit accessory for capturing and…

JFPC-PIC24 Programming Adapter

• SKU710-00540
• Hardware classificationDevelopment Hardware
• Connector 16-pin RJ-11 jack (for ICD 3 phone-style cable)

A programming/debug adapter used to connect a Microchip In-Circuit Debugger (ICD 3) or PICkit programmer to a CubeSat…

SpinLaunch Suborbital Accelerator

• Vacuum chamber span33 meters
• Test payload velocity range800-5,000 mph
• LocationSpaceport America, New Mexico, USA

A 33-meter vacuum-chamber test and qualification system at Spaceport America that launches payloads at 800-5,000 mph, serving as…

Quadsat Antenna Measurement System

• Measurement capabilitiesPointing accuracy, tracking and handover, radiation pattern raster and cut, cross-polar discrimination, gain, EIRP, G/T
• Antenna types supportedMulti-beam, flat-panel, electronically steerable (LEO and multi-orbit)
• Lifecycle coverageManufacturing QC, vendor type approval, factory/site acceptance testing, in-situ deployment calibration, ongoing performance monitoring

Drone-based satellite antenna test and calibration system supporting the full antenna lifecycle, tailored for LEO and multi-orbit terminals.

Aerotable test bench for mutual movement of spacecraft

• Overall dimensions5000x4000x3000 mm
• Active area dimensions1860x2480 mm
• Platform carrying capacityup to 10 kg

A frictionless air-bearing table for testing relative-motion, docking, and multi-satellite GNC algorithms.

Anechoic chamber

• Working volumenot less than 2x2x2 m
• Anechoic volume0.7x0.7x0.7 m
• Doorway dimensionsat least 1.9x1.9 m

A modular, on-site-assembled anechoic chamber (200 MHz-45 GHz) for antenna pattern and EMC testing.