Space Hardware Marketplace

Tu-POD Deployer

• TypePicoSat / PocketQube sub-deployer
• Host interfaceFits inside a standard P-POD

First-generation Teton deployer fitting inside a standard P-POD to launch PicoSats and PocketQubes.

1N HTP Monopropellant Thruster

1 N monopropellant thruster running on 98% high-test peroxide, developed at Łukasiewicz - ILOT and commercially produced by…

420N HTP Bipropellant Kick-Stage Engine

420 N-class bipropellant rocket engine using 98% hydrogen peroxide as oxidizer, developed under ESA's GRACE 1/2 programs and…

Highly concentrated, pure hydrogen peroxide

• Concentration range80% up to 99.99%
• Dedicated for in-space propulsion systems98% HTP

Thaliana Space offers highly concentrated hydrogen peroxide (HTP) ranging from 80% to 99.99%, with 98% HTP specifically designed…

High Test Peroxide (HTP)

• Concentration range80% to 99.99%
• Recommended grade for in-space propulsion98% HTP

Highly concentrated, pure hydrogen peroxide (HTP) propellant offered in concentrations from 80% up to 99.99%, with a 98%…

Green Propulsion System (4x1N HTP Monopropellant Module)

Blowdown monopropellant propulsion system using 98% HTP with four 1 N thrusters for LEO small-satellite orbital maneuvers, attitude…

LPT 9310 HP COTS+

The LPT 9310 HP COTS+ from Thales Group is a Pulse-Tube Cryocooler designed for space applications, offering a…

LPT 9510 COTS+

The LPT 9510 COTS+ is a Split Pulse-Tube Cryocooler designed for space and scientific applications, offering 1.4 W…

LPT6510 Pulse-tube Cryocooler

Designed-for-manufacturability pulse-tube cryocooler for 60 K and above, based on the flight-proven MPTC compressor.

Cold Plates

• MaterialsAl and Al composites (0 to T6 temper, most common); Cu and Cu composites incl. Copper-Molybdenum; stainless steel
• Working fluidsDeionized water (with corrosion inhibitors and internal channel chem film); EGW; PGW; PAO
• Heat flux capabilityUp to 50 W/cm² (higher when integrated with an oscillating heat pipe)

Single- and two-phase pumped fluid cold plates for high-power electronics, from simple welded and inlaid-tube designs to complex…

OHP Radiators

Oscillating heat pipe (OHP) embedded spacecraft radiators and structural panels for on-orbit waste-heat rejection, delivering up to 9x…

OHP Chassis

Oscillating heat pipe (OHP) embedded electronics chassis and enclosures that structurally house circuit cards, RF modules, and Li-ion…

OHP Heat Frames

Oscillating heat pipe (OHP) embedded structural heat frames for VPX/VITA circuit cards and RF/power electronics, offering up to…

Cyclops

• Positioning accuracy< 50 m
• Max demonstrated altitude1.1 km
• Max demonstrated range104 km

Cyclops is a software-only visual positioning system (VPS) that gives fixed-wing UAVs reliable position estimates when GPS is…

Mobile Satcom Antennas

Mobile Satcom Antennas are designed for vehicle-mounted satellite communication, offering high spectral efficiency and compatibility with wide-beam and…

Portable Satcom Antennas (ThinPack family)

The ThinPack family of portable Satcom antennas are lightweight, compact, and require no assembly, offering high spectral efficiency…

ThinAir Commercial IFC Antennas

• Motor typeHigh-torque brushless DC motors
• RF layersThree, entirely passive
• Electronics locationHosted in cabin (protected)

ThinKom's ThinAir family of phased-array in-flight connectivity (IFC) antennas provide high-capacity, multi-orbit satellite connectivity for commercial airline passengers.

Commercial IFC Antennas

• Orbit compatibilityMulti-Orbit — switches seamlessly between LEO, MEO, GEO and HEO with the same antenna
• Downlink data rateUp to 800 Mbps
• Uplink data rateUp to 200 Mbps

ThinKom's ThinAir family of low-profile phased-array in-flight connectivity (IFC) antennas that provide high-capacity satellite broadband connectivity for commercial…