Space Hardware Marketplace

FoX Payload Processor

• FunctionControl and data processing for payloads, instruments and robotics
• ProcessingSoftware and gateware processing, scalable to processing and storage needs
• PlatformPart of the FoX Electronics Platform (3U SpaceVPX)

High-performance processing unit for payloads, instruments and robotics, with scalable software and gateware processing.

Constellation Remote Terminal Unit (cRTU)

• FunctionBridge between On-Board Computer and platform electronic interfaces
• Board commonalitySame commercial I/O boards as the cOBC
• CustomizationAdditional modifications and new board types available on request

Customizable remote terminal unit bridging the on-board computer and platform electronic interfaces, based on the same COTS I/O…

Next Generation On Board Computer (OBC NG)

• Core ASICRadiation-hardened CREOLE chip developed by Beyond Gravity
• ProcessorFault-tolerant SPARC V8
• Integrated functionsCommunication functions, reconfiguration function, mass memory controller, extension possibilities

Radiation-hardened satellite on-board computer built around the Beyond Gravity CREOLE chip with fault-tolerant SPARC V8 processor.

Constellation On Board Computer (cOBC)

• ArchitectureComplete subsystem based entirely on commercial components
• RedundancyFully redundant, flight-proven FDIR
• Integrated functionsOn-board processing, GNSS receiver, ground communication, platform and payload interfaces

Fully redundant on-board computer subsystem built entirely from commercial components, with integrated GNSS receiver and platform/payload interfaces.

NavRIX Integral GNSS Receiver

• Supported GNSS signalsGPS L1 C/A, Galileo E1 B/C
• On-board position accuracy1.0 m 3D rms
• On-board velocity accuracy25 mm/s 3D rms

GNSS receiver function integrated into Beyond Gravity's next-generation on-board computer (cOBC), needing only an external antenna.

FoX NavRIX GEO GNSS Receiver

• ConstellationsGPS, Galileo
• Target orbitsGTO / GEO
• On-board navigation accuracyBelow 10 m 3D rms

Cost-efficient, optionally redundant software-defined GNSS receiver for commercial GTO/GEO missions, accurate to below 10 m 3D rms.

GEORIX GNSS Receiver

• Supported GNSS signalsGPS C/A on L1, Galileo E1 B/C
• Signal processing hardwareDedicated RF and Mixed-Signal ASICs plus AGGA-4 ASIC
• Position accuracy in GEO20.0 m 3D rms

Multi-constellation GNSS receiver for GTO/GEO missions with better than 20 m on-board real-time navigation accuracy in GEO.

FoX NavRIX GNSS Receiver

• Supported GNSS signalsGPS L1 C/A, GPS L2C, GPS L5 I/Q, Galileo E1 B/C, Galileo E5a I/Q, Galileo E6 B/C (optional)
• On-board position accuracy< 1.0 m 3D rms
• On-board velocity accuracy< 2 mm/s 3D rms

Next-generation multi-frequency, multi-constellation GNSS receiver built on commercial components, with optional subscription-free PPP.

PODRIX GNSS Receiver

• Supported GNSS signalsGPS L1 C/A, GPS L2C, GPS L5 I/Q, Galileo E1 B/C, Galileo E5a I/Q, Galileo E6 B/C (optional)
• On-board position accuracy< 1.0 m 3D rms
• On-board velocity accuracy< 2 mm/s 3D rms

High-performance spaceborne GNSS receiver with real-time navigation below 20 cm and Precise Orbit Determination to a few centimetres.

LEORIX GNSS Receiver

• Supported GNSS signalsGPS L1 C/A, Galileo E1 B/C
• On-board position accuracy1.0 m 3D rms
• On-board velocity accuracy2 mm/s 3D rms

Multi-constellation single-frequency GNSS receiver for LEO with on-board real-time navigation accuracy below one metre.

CubeDynA

• Supported platforms1U to 12U CubeSats
• Test modeClosed-loop ADCS testing

Ground testing equipment for CubeSat ADCS closed-loop testing.

eON NEXUS

• Base capabilityAll eON HOME navigation and guidance capabilities
• Conjunction assessmentOnboard and real-time
• ManeuversAutonomous avoidance maneuver planning and execution

Autonomous collision avoidance system for satellites.

eON HOME

• Orbit determinationOnboard, from GNSS measurements
• GuidanceOnboard trajectory computation and maneuver planning
• Cooperative navigationVia inter-satellite link (ISL)

Autonomous guidance and navigation unit for Earth-orbit satellites.

IDE1140

The IDE1140 (previously VA140) is a 64 channel low-noise/low power high dynamic range charge sensitive preamplifier-shaper circuit, with…

IDE1180 AMADEUS

The IDE1180 is an application specific integrated circuit (ASIC), which has been designed for the front-end readout of…

VASCM3.2

• Channels128

The VASCM3.2 is a 128 channel low-noise/low power current sensitive preamplifier-filter circuit, with two-channel alternating sample and hold.

VA32HDR14.2

• Number of channels32

32-channel and high dynamic range charge sensitive preamplifier-shaper circuit, with sample and hold, multiplexed analog readout and calibration…

VA32HDR14.3

• Number of channels33
• Typecharge sensitive preamplifier-shaper circuit

33-channel and high dynamic range charge sensitive preamplifier-shaper circuit, with sample and hold, multiplexed analog readout and calibration…