Space Hardware Marketplace

Transporter-Erector Automatic Mating Units Set

• Year of releaseDevelopment start 2015
• Design life15 years
• Lead time18/4 months

The Transporter-Erector Automatic Mating Units Set is designed for automatic mating of electric and thermal conditioning system lines…

Nitrogen System for Purge and Fire Protection

• PurposeCompressed Nitrogen delivery from Compressed Gases Storage (CGSE) to intermediate socket panel of Compressed Gases Supply System inside the facility and further through single use pipelines of the System into LV when process purging of the LV aft compartments and engine combustion chambers.
• Year of releaseDevelopment start 2002
• Flight qualification of the productNo

A ground support system designed to deliver compressed nitrogen for purging launch vehicle aft compartments and engine combustion…

Noninterrupted Power Supply Equipment Set

A ground infrastructure equipment set that transmits AC power to consumers via a five-wire network with a dead…

Power Module of the Mobile Temperature Control Unit

This power module provides electric power to a mobile temperature control unit, designed for use during the transportation…

Pumping Station

An explosion-proof pumping station with a submersible pump that supplies hydraulic fluid (oil) at specified pressure, filtration, and…

Signaling Device

The Signaling Device (FAM) monitors the maximum permissible concentration of oil in high-pressure air at the outlet of…

Solar Panel Check Stand

The Solar Panel Check Stand is a ground support equipment designed for weight relief and opening-out testing of…

Liquid Oxygen Supply System

• PurposeSystem is intended for Liquid Oxygen intaking, storing and delivery into LV tanks.
• Year of releaseDevelopment start 2002
• Design life2 years

The Liquid Oxygen Supply System is designed for the intake, storage, and delivery of liquid oxygen into launch…

Low Voltage Packaged Devices

• PurposeReceiving and distributing electrical power among consumers, electrical equipment control and its protection from short-circuit and overload currents
• Year of release2014
• Design life10 years

Low-voltage packaged electrical devices for receiving and distributing power among consumers, with control and short-circuit/overload protection, used in…

LV Thermal Conditioning System [high pressure]

• PurposeIntaking of compressed air and nitrogen under pressure of 38…40 Mpa (300…400 kgf/cm2) from Compressed Gases Storage and delivery of air and Nitrogen with specified parameters.
• Flight qualification of the productNo
• Possibility to adapt the product to customer requirementsYes

The LV Thermal Conditioning System is designed to intake compressed air and nitrogen at high pressures and deliver…

LV Thermal Conditioning System [low pressure]

• PurposeAir preparation (cleaning, drying, heating) and delivery to LV compartments during prelaunch and launch
• Development start2005
• Lead time18 months (new) / 6 months (refurbished)

Stationary LV compartment thermal conditioning system (air cleaning/drying/heating) for Soyuz at Kourou, GSC launch complex. Vapor compression refrigerating…

Mobile Service Tower

• PurposeMST is intended for pre-launch preparation and launch of ILV with the Payloads comprised of Automatic Satellites, Upper Stages.
• Year of releaseDevelopment start 2013
• Design lifeSpecified Service Life- 10 years

The Mobile Service Tower (MST) is a self-propelled, weather-proof structure designed for pre-launch preparation and launch of launch…

Integration Stand 2

The Integration Stand 2 is a ground support equipment designed for the maintenance, assembly, and testing of space…

Kerosene Cooling System

• PurposeThe System is intended for kerosene cooling down in the Units.
• Year of releaseDevelopment start 2002
• Design life2 years

The Kerosene Cooling System is designed to cool kerosene propellant in ground-based units, consisting of tanks, pumping equipment,…

Kerosene Supply System 1

• PurposeThe System is intended for LV First and Second Stages tanks filling/dumping with rocket fuel.
• Year of release26.05.2008
• Design life2 years

The Kerosene Supply System 1 is designed for filling and dumping rocket fuel (kerosene) into the first and…

Kerosene Supply System

• PurposeThe System is intended for rocket fuel supply/ discharge to/ from LV third stage tank.
• Year of releaseManufactured date 01.09.2008g.
• Design life2 years

The Kerosene Supply System is designed for the supply and discharge of rocket fuel to and from the…

Launch System

• PurposeLS is intended for ILV with various Payloads holding up when prelaunch preparation and launch.
• Year of release2008
• Design lifeSpecified Service Life- 10 years

The Launch System (LS) is a metal structure designed for the prelaunch preparation and launch of orbital launch…

Liquid Nitrogen Supply System

• PurposeSystem is intended for Liquid Nitrogen intaking, storing and delivery into LV tanks.
• Year of releaseDevelopment start 2002
• Design life2 years

The Liquid Nitrogen Supply System is designed for intaking, storing, and delivering liquid nitrogen to launch vehicle tanks.