Space Hardware Marketplace

RF Redundancy Switches

• Wide rangeOptions up to 1x32 depending on application
• Remote M&CVia RJ45 Ethernet port
• Additional featuresRF level detection, DC & 10 MHz pass, secure communications protocols (product dependant)

ETL Systems offers a diverse range of RF switches tailored for reliable switching in IF, Broadband, and L-band…

Splitters & Combiners

• Frequency Range10 MHz
• Gain0 dB ± 1.5 dB
• Return Loss18 dB typical, 15 dB minimum

A versatile range of active and passive L-band splitters and combiners offering multiple configurations, flexible form factors, and…

RF Switch Matrix Systems

• Capacity4x4 to 256x256 and beyond
• Frequency CoverageIF, L and Ka-band ready options
• Secure CommunicationsHTTPS and SNMPv3

ETL Systems offers an extensive range of RF routers, providing robust RF signal distribution solutions for satellite communications,…

GENUS DIGITAL Module – RF over IP

• Frequency Range850-2450 MHz
• ChannelsUp to 8 channels of 500 MHz
• ADC12-bit

ETL's revolutionary digitisation module, the GENUS DIGITAL 1000, provides RF over IP transport within satellite gateways or ground…

80W Ku-band SSPA

• Input Frequency850-3000 MHz (selectable in 1 KHz steps)
• Output Frequency850-3000 MHz (selectable in 1 KHz steps)
• Instantaneous BandwidthMode 1: 200 MHz, Mode 2: 400 MHz

A super compact GaN-powered outdoor BUC/SSPA for Ku-band applications.

PTFE (Teflon) Heaters

• Operating temperature-200 to 150°C
• Maximum size10"×40"
• Heater thickness Over element0.060"

Minco's PTFE (Teflon) heaters provide clean, non-stick thermal transfer designed to withstand tough applications, including those in aerospace…

Mica THERMOFOIL TM Heaters

• Watt Densityup to 110 W/in²
• Temperature Range-150°C to 600°C (-238°F to 1112°F)
• Max. size560 mm x 1168 mm

Mica Thermofoil heaters deliver flexible wattage capacity capable of providing uniform heating across a variety of shapes and…

Thermal-Clear TM Transparent Heaters

Thermal-Clear heaters provide an accurate, reliable heat source without blocking light, ideal for high visibility use cases in…

Silicone Rubber Heaters

• Operating temperature-45 to 235 °C
• Max. size560 mm x 2285 mm
• Max. resistance density31 Ω/cm²

Minco's flexible silicone rubber heaters are designed for large-size, industrial applications requiring precise, reliable thermal transfer and excellent…

All-Polyimide (KAPTON®) Heaters

• Maximum operating temperature260°C
• Max. size560 mm x 1145 mm
• Max. resistance density230 Ω/in²

Minco's all-polyimide heaters offer a high-performance alternative to standard polyimide flexible heaters, supporting higher temperatures and greater watt…

Polyimide (Kapton®) Thermofoil™ Heaters

• Mass0.009 oz/in²
• Dimensions0.010” (0.25 mm) thick over the element

Flexible polyimide Thermofoil™ heaters offer rugged, reliable performance in a thin, lightweight package, ideal for maximizing thermal transfer…

SmartHeat™ SLT Thin-Film Heaters

• Temperature range-45°C (-49°F) to 100°C (212°F)
• Set point range10°C (50°F) to 70°C (158°F)

SmartHeat SLT uses a patented polymer compound to produce a thin film heater that controls temperature without the…

Miniature Sensors

• Temperature range-50 to 260 °C
• Pressure rating50 psi

Minco's miniature temperature sensors are small-profile sensors that save space and weight while providing fast thermal response time…

Probes & Probe Assemblies

• Temperature range-50 to 260 °C
• Pressure rating3.4 bar

Minco's advanced temperature probe sensor technology comes in multiple standard and custom-engineered configurations to meet diverse requirements for…

Stator Sensors

• Operating temperature-50 to 260°C (-58 to 500°F)
• Pressure rating7000 psi (483 bar) at 21°C, reducing to 6300 psi (433 bar) at 260°C
• Insulation resistance10 megohms min. at 100 VDC

Flat, laminated stator RTDs from Minco deliver accurate temperature measurement between stator windings to prevent motor overheating in…

Surface Sensors

• Temperature range-50 to 260 °C
• Pressure rating3.4 bar

Minco’s Thermal-Ribbon™ sensors are thin, flexible RTDs and thermocouples designed for surface or pressure sensitive adhesive mounting, offering…

Elements

• Temperature range-50 to 260 °C
• Pressure rating3.4 bar

Wire-wound and thin-film ceramic RTD elements deliver accurate, reliable and repeatable temperature measurement over a wide temperature range.

Humidity Sensors

• Operating temperature-50 to 260°C
• Pressure rating7000 psi (483 bar) at 21°C
• Insulation resistance10 megohms min. at 100 VDC

Minco humidity sensors deliver reliable, accurate readings across a variety of applications, including those in aerospace and defense.